3 dB 90° Card Couplers
HD-M Series
ꢀFeatures
1.High Performance
The high frequency characteristics feature.
Extremely low loss and a high degree of matching.
2.Power Uniform Distribution and
90° Phase Difference Type
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90° phase difference between the two outputs (or
two inputs).
HD-0053M3-IH
HD-0195M3-DH-1
HD-0900M3-CH-1
HD-0195M3-DH
3.Miniature and Lightweight
Corrosion-resistant aluminum is used for the cover
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be extremely small and lightweight.
HD-0620M3-EH
HD-3900M3-BH
HD-0313M3-FH
HD-1700M3-FH
HD-1800M3-CH
HD-2100M3-CH
HD-3200M3-BH
HD-6150M3-AH
4.Equipped with Tabs
Tabs permit direct mounting to surface circuits.
5.High Power Type
This type can be used with up to 100 W of power.
ꢀProduct Specifications
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
30 to 6400 MHz
50 ohms
50 to 100 W
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Ratings
Note: The frequency range and the maximum input power will differ depending on the products.
Item
Standard
Conditions
1.Insulation resistance 500M ohms min
100 V DC
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
2.Vibration
2
No electrical discontinuity of 1 µs or more
acceleration of 98 m/s for 2 hours in each of 3 directions
2
No damage, cracks, or parts dislocation
Acceleration of 980 m/s , sine half-wave waveform,
3.Shock
3 cycles in each of the 3 axis
Temperature : -55ç
Time : 30 15 max.
200 cycles
ꢀ
+5ç to +35ç
ꢀ +85ç ꢀ +5ç to +35ç
4.Temperature cycle No damage, cracks, or parts dislocation
ꢀ
ꢀ
30 15 max. (Minutes)
ꢀ
5.Corrosion resistance No serious corrosion
Exposed to 20% salt water solution for 48 hours
Exposed to 10% potassium sulfide solution for 100 hours
6.Hydrogen sulfide gas No damage, cracks, or parts dislocation
The test method conforms to MIL-STD-202.
ꢀ
ꢀMaterials
Material
Finish
Part
Cover (A)
Cover (B)
Board
---------
Stainless steel
Aluminum
Conductive white Alumite
Gold plating
---------
Dielectric
Rivets
Aluminum
Eyelet
Brass
Nickel plating
Gold plating
---------
Tabs
Phosphor bronze
Stainless steel
Stainless steel
Cover (A)
Cover (B)
---------
27