HCPL-261A, HCPL-061A, HCPL-263A, HCPL-063A
HCPL-261N, HCPL-061N, HCPL-263N, HCPL-063N
HCMOS Compatible, High CMR, 10 MBd Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Features
Description
• HCMOS/LSTTL/TTL performance compatible
The HCPL-261A family of optically coupled gates shown
on this data sheet provide all the benefits of the in-
dustry standard 6N137 family with the added benefit
of HCMOS compatible input current. This allows direct
interface to all common circuit topologies without ad-
ditional LED buffer or drive components. The AlGaAs
LED used allows lower drive currents and reduces
degradation by using the latest LED technology. On
the single channel parts, an enable output allows the de-
tector to be strobed. The output of the detector IC is an
open collector schottky-clamped transistor. The internal
shield provides a minimum common mode transient im-
munity of 1000V/µs for the HCPL-261A family and 15000
V/µs for the HCPL-261N family.
• 1000 V/µs minimum Common Mode Rejection (CMR)
at VCM = 50 V (HCPL-261A family) and 15 kV/µs
minimum CMR at VCM = 1000 V (HCPL-261N family)
• High speed: 10 MBd typical
• AC and DC performance specified over industrial
temperature range -40°C to +85°C
• Available in 8 pin DIP, SOIC-8 packages
• Safety approval:
– UL recognized per UL1577 3750Vrms for 1 minute
and 5000Vrms for 1 minute (Option 020)
– CSA Approved
– IEC/EN/DIN EN 60747-5-2 approved
Functional Diagram
Applications
HCPL-261A/261N
HCPL-061A/061N
HCPL-263A/263N
HCPL-063A/063N
• Low input current (3.0 mA) HCMOS compatible
NC
ANODE
CATHODE
NC
1
2
V
V
V
ANODE
CATHODE
CATHODE
ANODE
1
2
V
V
8
7
8
7
CC
CC
O1
O2
1
1
version of 6N137 optocoupler
E
• Isolated line receiver
V
3
4
6
5
3
4
6
5
O
2
2
• Simplex/multiplex data transmission
• Computer-peripheral interface
• Digital isolation for A/D, D/A conversion
• Switching power supplies
GND
GND
SHIELD
SHIELD
TRUTH TABLE
TRUTH TABLE
(POSITIVE LOGIC)
(POSITIVE LOGIC)
LED ENABLE OUTPUT
LED OUTPUT
• Instrumentation input/output isolation
• Ground loop elimination
ON
OFF
ON
OFF
ON
OFF
H
H
L
L
NC
NC
L
H
H
H
L
ON
OFF
L
H
•ꢀ Pulse transformer replacement
H
The connection of a 0.1 µF bypass capacitor between pins 5 and 8 is
required.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.