HA-5002
®
Data Sheet
March 8, 2006
FN2921.11
110MHz, High Slew Rate, High Output
Current Buffer
Features
• Voltage Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.995
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . .3000kΩ
• Low Output Impedance . . . . . . . . . . . . . . . . . . . . . . . . 3Ω
• Very High Slew Rate . . . . . . . . . . . . . . . . . . . . . 1300V/µs
• Very Wide Bandwidth. . . . . . . . . . . . . . . . . . . . . . 110MHz
• High Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . ±200mA
• Pulsed Output Current . . . . . . . . . . . . . . . . . . . . . . 400mA
• Monolithic Construction
The HA-5002 is a monolithic, wideband, high slew rate, high
output current, buffer amplifier.
Utilizing the advantages of the Intersil D.I. technologies, the
HA-5002 current buffer offers 1300V/µs slew rate with
110MHz of bandwidth. The ±200mA output current capability
is enhanced by a 3Ω output impedance.
The monolithic HA-5002 will replace the hybrid LH0002 with
corresponding performance increases. These characteristics
range from the 3000kΩ input impedance to the increased
output voltage swing. Monolithic design technologies have
allowed a more precise buffer to be developed with more than
an order of magnitude smaller gain error.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Line Driver
• Data Acquistion
The HA-5002 will provide many present hybrid users with a
higher degree of reliability and at the same time increase
overall circuit performance.
• 110MHz Buffer
• Radara Cable Driver
• High Power Current Booster
• High Power Current Source
• Sample and Holds
• Video Products
For the military grade product, refer to the HA-5002/883
datasheet.
Ordering Information
TEMP.
PKG.
PART NUMBER
HA2-5002-2
PART MARKING
HA2-5002-2
RANGE (°C)
PACKAGE
8 Pin Metal Can
DWG. #
-55 to 125
0 to 75
T8.C
HA2-5002-5
HA2-5002-5
HA3-5002-5
HA3-5002-5Z
HA4P5002-5
HA4P5002-5Z
50025
8 Pin Metal Can
8 Ld PDIP
T8.C
HA3-5002-5
0 to 75
E8.3
HA3-5002-5Z (Note)
HA4P5002-5
0 to 75
8 Ld PDIP* (Pb-free)
20 Ld PLCC
E8.3
0 to 75
N20.35
N20.35
M8.15
M8.15
M8.15
M8.15
HA4P5002-5Z (Note)
HA9P5002-5
0 to 75
20 Ld PLCC (Pb-free)
8 Ld SOIC
0 to 75
HA9P5002-5Z (Note)
HA9P5002-9
50025Z
0 to 75
8 Ld SOIC (Pb-free)
8 Ld SOIC
50029
-40 to 85
-40 to 85
HA9P5002-9Z (Note)
50029Z
8 Ld SOIC (Pb-free)
*Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003-2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.