HA-2841
®
Data Sheet
May 2003
FN2843.4
50MHz, Fast Settling, Unity Gain Stable,
Video Operational Amplifier
Features
• Low Supply Current . . . . . . . . . . . . . . . . . . . . . . . . . 10mA
• Low AC Variability Over Process and Temperature
The HA-2841 is a wideband, unity gain stable, operational
amplifier featuring a 50MHz unity gain bandwidth, and
excellent DC specifications. This amplifier’s performance is
further enhanced through stable operation down to closed
loop gains of +1, the inclusion of offset null controls, and by
its excellent video performance.
• Unity Gain Bandwidth. . . . . . . . . . . . . . . . . . . . . . . 50MHz
• Gain Flatness to 10MHz. . . . . . . . . . . . . . . . . . . . . 0.05dB
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . 240V/µs
• Low Offset Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . 1mV
• Fast Settling Time (0.1%). . . . . . . . . . . . . . . . . . . . . . 90ns
• Differential Gain/Phase . . . . . . . . . . 0.03%/0.03 Degrees
• Enhanced Replacement for AD841 and EL2041
The capabilities of the HA-2841 are ideally suited for high
speed pulse and video amplifier circuits, where high slew
rates and wide bandwidth are required. Gain flatness of
0.05dB, combined with differential gain and phase
specifications of 0.03%, and 0.03 degrees, respectively,
make the HA-2841 ideal for component and composite video
applications.
Applications
• Pulse and Video Amplifiers
• Wideband Amplifiers
A zener/nichrome based reference circuit, coupled with
advanced laser trimming techniques, yields a supply current
with a low temperature coefficient and low lot-to-lot
• High Speed Sample-Hold Circuits
• Fast, Precise D/A Converters
• High Speed A/D Input Buffer
variability. Tighter I
control translates to more consistent
CC
AC parameters ensuring that units from each lot perform the
same way, and easing the task of designing systems for
wide temperature ranges. Critical AC parameters, Slew Rate
and Bandwidth, each vary by less than ±5% over the
industrial temperature range (see characteristic curves).
Part Number Information
PART NUMBER
(BRAND)
TEMP.
RANGE ( C)
PKG.
NO.
o
PACKAGE
8 Ld PDIP
8 Ld SOIC
For military grade product, refer to the HA-2841/883 data
sheet.
HA3-2841-5
0 to 75
E8.3
M8.15
HA-2841 (PDIP, SOIC)
HA9P2841-5
(H28415)
0 to 75
TOP VIEW
BAL
-IN
1
2
3
4
8
7
6
5
BAL
V+
-
+
+IN
V-
OUT
NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.