MIL-STD-348B
Applicable standard
Operating
Storage
-55 °C to +105 °C ( 95 %RH Max.)
-55 °C to +50 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
50 Ω( 0 ~ 50 GHz)(Note 4)
-- W
----
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
X
X
X
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 4 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 2 mΩ Max.
5000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
No flashover or breakdown.
VSWR 1.5 Max.(Note 2)
Frequency
0 ~ 50 GHz
X
-
(Impedance 42.5Ω PCB)
Voltage standing wave
ratio (back to back )
Insertion loss
Frequency 0 ~ 40 GHz.
VSWR 1.4 Max.
VSWR 1.75 Max.
--- dB Max.
X
-
-
Frequency
Frequency
40 ~ 50GHz
- ~ - GHz.
-
MECHANICAL CHARACTERISTICS
+0
Contact insertion and
extraction forces
Insertion and
φ 0.495
by steel gauge.
Insertion force
Extraction force 0.2~2 N.
Insertion force --- N Max.
--- N Max.
-
X
-
X
-0.005
Measured by applicable connector.
500 times insertion and extractions.
-
-
-
-
extraction forces
Mechanical operation
Extraction force --- N Min.
1)Contact resistance:
Center contact 6 mΩ Max.
Outer contact 4 mΩ Max.
2)No damage, crack and looseness of parts.
X
-
Vibration
Shock
Frequency 10 to 2000 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
196 m/s2 at 10 cycles for 3 directions.
980 m/s2 directions of pulse 6 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 5000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +105 → - °C
30 → 3 → 30 → 3 min.
X
X
-
-
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
1)Contact resistance:
Center contact
Outer contact
6 mΩ Max.
4 mΩ Max.
Count
5
Description of revisions
DIS-D-00001726
Designed
TP.MATSUMOTO
Checked
TS.NOBE
Date
16.12.08
1
△
Remark
RoHS Compliant
KY.SHIMIZU
16.06.08
Approved
Checked
Designed
Drawn
Port1
Port2
Note
Measurement state of back to back.
KY.SHIMIZU
TP.MATSUMOTO
TP.MATSUMOTO
16.06.08
16.06.08
16.06.08
Note
Note
Note
2
3
4
The actual value rather than guarantee value.
This connector should be used for test port only.
This connector is optimized for impedance 42.5Ω signal line.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-368164-17-00
H2.4-R-SR2-IN(17)
SPECIFICATION SHEET
1
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL338-0602-0-17
FORM HD0011-2-1