CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
Chip Type, 150°C High Reliability
GYD
High Reliability, Low ESR,High ripple current.
Long life of 1000 hours at 150°C.
Compliant to the RoHS directive (2011/65/EU,(EU)2015/863).
AEC-Q200 Qualified. Please contact us for details.
GYD
High
Temperature
GYC
Specifications
Item
Performance Characteristics
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
–55 to +150°C
25 to 35V
100 to 270µF
20% at 120Hz, 20°C
Rated voltage (V)
25
0.14
35
0.12
120Hz 20°C
Tangent of loss angle (tan δ)
tan δ (max.)
ESR
Less than or equal to the specified value 100kHz, 20°C
at
Leakage Current
After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV( ).
µA
Temperature Characteristics
(Max.Impedance Ratio)
(
)
)
(
(
)
)
Z –25°C / Z +20°C
2
(
(
)
Z –55°C / Z +20°C
2.5ꢀ 100kHz
Capacitance change
tan δ
ESR
Within 30% of initial capacitance value
200% or less of the initial specified value
200% or less of the initial specified value
Less than or equal to the initial specified value
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 1000 hours at 150°C, the peak
voltage shall not exceed the rated voltage.
Endurance
Shelf Life
Leakage current
After storing the capacitors under no load at 150°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
%
Capacitance change
tan δ
Leakage current
Within 30 of the initial capacitance value
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 2000 hours at 85°C, 85% RH.
Damp Heat
200% or less of the initial specified value
Less than or equal to the initial specified value
(Steady State)
The capacitors are kept on a hot plate for 30 seconds,
which is maintained at 250°C. The capacitors shall meet
the characteristic requirements listed at right when they are
removed from the plate and restored to 20°C.
%
Capacitance change
tan δ
Leakage current
Within 10 of the initial capacitance value
Resistance to
Soldering Heat
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Marking
Black print on the case top.
※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V)
Dimensions
Positive
(φ8, φ10 )【Standard】
Type numbering system (Example : 35V 100µF)
Plastic platform
Voltage (V:3ꢀV)
Trade mark
Series
C
0.ꢁ
0.3 max.
1
2
3
4
5
6
7
8
9 10 11 12 13 14
G Y D 1 V 1 0 1 M C Q 1 G S
Taping code
Size code
Configuration
Capacitance tolerance ( 20ꢀ%
Size
Code
Q
L
0.ꢀ
Standard
Lot No.
Rated capacitance
(100µF
%
%
Capacitance
Negative
H
Vibration Resistance
W
Rated voltage
(35V
Series name
Type
Positive
(φ8, φ10 )【Vibration Resistance】
Plastic platform
Series
Voltage (V:3.V)
Trade mark
Standard
(mm)
10 × 10
11.0
10.3
10.3
4.5
Vibration Resistance
(mm)
0ꢀ3 maxꢀ
C
0ꢀꢁ
φD×L
φD×L
8 × 10
9.0
8.3
8.3
3.1
8 × 10
10 × 10
A
B
C
E
L
A
B
C
E
L
9.0
8.3
8.3
3.1
10.5
11.0
10.3
10.3
4.5
Voltage
H
10ꢀ. 0ꢀ.
V
Code
25
E
35
V
10.3
10.3
10.5
Negative
Lot Noꢀ
Capacitance
H
0.8 to 1.1 0.8 to 1.1
H
1.1 to 1.5 1.1 to 1.5
Aid electrode
Frequency coefficient of rated ripple current
0 Frequency0/
120Hz
1kHz
10kHz 100kHz or more
Coefficient
0.15
0.40
0.75
1.00
Dimension table in next page.
CAT.8100M