GX4002 2x2 14.025Gb/s Crosspoint Switch with Trace Equalization and Output
De-Emphasis
Key Features
Description
•
•
2 x 2 crosspoint switch architecture
Integrated CDR with 9.95 to 11.3Gb/s and 14.025Gb/s
reference-free operation
The GX4002 is a low-power, high-speed 2 x 2 crosspoint
switch, with robust signal conditioning circuits for driving
and receiving high-speed signals through backplanes.
•
•
•
Automatic rate detect
The device consumes as low as 600mW of power (typical)
with all channels operational. Unused portions of the chip
can be turned off in order to further reduce power
consumption.
Dynamic on-chip power management control
Multiple user-programmable power-down saving
modes
•
•
Independent programmable input trace equalization to
reduce deterministic jitter (ISI)
The signal conditioning features of the GX4002 include
per-input clock and data recovery (CDR), programmable
equalization and per-output programmable de-emphasis.
The input equalizer removes ISI jitter—typically caused by
PCB trace losses—by opening the input data eye in
applications where long PCB traces are used. The
integrated CDR “resets” the jitter budget, effectively
erasing the signal distortion that can occur during
transmission.
Independent programmable output pre-emphasis for
driving long board traces
2
•
•
Digital control through I C interface
Integrated analog-to-digital converter, which provides
access to digital diagnostic information on supply
voltage and die temperature
•
•
•
•
•
Integrated eye monitor and PRBS7 generator/checker
Polarity invert, output mute functions available
Single 3.3V supply (±5%)
Output pre-emphasis capability provides a boost of the
high-frequency content of the output signal, such that the
data eye remains open after passing through a long
interconnect of PCB traces and connectors.
On-chip I/O termination
Low power consumption: 600mW typical
The GX4002 features an integrated analog-to-digital
converter, which, through the serial interface, provides
digital diagnostic information about supply voltage and die
temperature.
Low power option for 4.25 & 8.5Gb/s operation:
415mW typical
•
•
•
5mm x 5mm 32-pin QFN package
-40°C to +100°C case operation
RoHS-compliant
The GX4002 device is packaged in a small-outline 5mm ×
5mm 32-pin, high-frequency QFN package with exposed
pad.
Applications
The GX4002 is Pb-free, and the encapsulation compound
does not contain halogenated flame retardant. This
component and all homogeneous sub components are
RoHS-compliant.
•
•
•
•
Enterprise and carrier applications
10GbE, Fibre Channel and InfiniBand networks
Redundancy switching
Retimer for 10Gb/s and 14Gb/s backplane and
linecards
GX4002 2x2 14.025Gb/s Crosspoint Switch with Trace
Equalization and Output De-Emphasis
Data Sheet
1 of 74
www.gennum.com
Proprietary & Confidential
55972 - 0
March 2012
5秒后页面跳转
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
ADUM1201资料手册解读：参数分析、引脚说明、应用分析
一文带你了解压敏电阻器在直流电路中的过压保护作用
可控硅触发板选型指南
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
