Resistors
TaNFilm® Small Outline
Surface Mount Resistor Network
Ultra precision tantalum
nitride resistance element
on high purity alumina.
Rugged, molded
construction.
Compliant leads to
compensate for
thermal expansion
and contractions.
GUB Series
Thin-film on ceramic technology
0.22” and 0.33” sizes available
RoHS compliant version available
DESC 87012 and 87013 available
Standard JEDEC packages for automaꢀc placement equipment
All Pb-free parts comply with EU Direcꢀve 2011/65/EU amended by (EU) 2015/863 (RoHS3)
IRC’s TaNFilm®, Small Outline Integrated Circuit resistor networks are ideally suited for surface mounting.
The 0.05 inch lead spacing provides higher lead density, increased component count, lower installed resistor
cost, and better reliability. They are ideally suited for the latest surface mount assembly techniques, and each
lead can be 100% visually inspected. The compliant leads relieve thermal expansion and contraction stresses
created by soldering and temperature excursions.
The tantalum nitride film system provides precision tolerance, exceptional TCR tracking, and low noise.
TaNFilm® provides stability, high reliability, and long life characteristics. Testing has demonstrated performance
exceeding MIL-PRF-83401 characteristic H.
Electrical Data
GM Type
GL Type
Schem A: 10 to 150K
Schem A: 10 to 200K
Schem B: 10 to 75K
Schem B: 10 to 100K
Resistance Range (Ω)
Absolute Tolerance
Ratio Tolerance To R1
TCR (ppm/°C)
Available to ±0.1%
Available to ±0.05%
±25, ±50, ±100
±5
TCR Tracking To R1 (ppm°C)
Operating Temperature Range
Noise
-55°C to +125°C
Less than -25 dB
Substrate
High purity alumina substrate
Custom circuits and special testing available.
General Note
BI Technologies IRC Welwyn
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronics.com/resistors
© TT Electronics plc
12.19