APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
250 V AC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
1A DC.
30 mΩ MAX .
30 mΩ MAX .
×
×
-
-
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
500 V DC
100 MΩ MIN.
×
×
-
-
VOLTAGE PROOF
650 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 60 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
VIBRATION
FREQUENCY 20 TO 200 Hz,
43.1 m/s2 AT 3 h FOR
DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
10 s.
×
-
3
×
×
-
-
② CONTACT RESISTANCE: 60 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
SHOCK
FREQUENCY 20 TO 50 Hz,
66.6 m/s2 AT 1 h .
① NO ELECTRICAL DISCONTINUITY OF
10 s.
×
-
×
×
-
-
② CONTACT RESISTANCE: 60 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
① DURING APPLYING,MATING
COMPLETELY.
×
×
-
-
② AFTER APPLYING,NO DEFECT OF
MATING PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
(STEADY STATE)
EXPOSED AT 60 C, 90 ~ 95 %, 96 h.
① CONTACT RESISTANCE: 60 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
×
-
-
-
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→5 TO 35→ 105→5 TO 35C
① CONTACT RESISTANCE: 60 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
×
-
-
-
TIME
30 →
5
→ 30 → 5 min
UNDER 1000 CYCLES.
DRY HEAT
EXPOSED AT 105C, 300 h.
EXPOSED AT -40C , 120 h.
① CONTACT RESISTANCE: 60 m MAX.
②
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
×
×
×
×
-
-
-
-
-
-
① CONTACT RESISTANCE: 60 m MAX.
②
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
COLD
RESISTANCE TO SO2 GAS
EXPOSED IN 500 PPM FOR 8h.
① CONTACT RESISTANCE: 60 m MAX.
② NO HEAVY CORROSION.
1
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
RESISTANCE TO
SOLDERING HEAT
SOLDER TEMPERATURE, 260℃ FOR
-
-
-
-
IMMERSION, DURATION, 10 s.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE, 245℃
FOR IMMERSION DURATION, 3 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
TK.SHISHIKURA
CHECKED
DATE
1
1
DIS-T-00002748
HS.OZAWA
17.12.01
12.02.29
12.02.29
12.02.29
12.02.29
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
AR.SHIRAI
(NOTE1)
(NOTE2)
(NOTE3)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
CONTACT: GT8B-2428SCF(CL758-0055-7),GT8E-2022SCF(CL758-0033-4).
ABOVE IS SPECIFICATION WHEN APPLICABLE CONTACTS ARE ASSEMBLED WITH
HOUSING.
AR.SHIRAI
YN.KADOTA
YN.KADOTA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-166704-22-01
GT8E-8S-HU(22)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
1
△
1/1
CL758-0049-4-22
FORM HD0011-2-1