APPLICABLE STANDARD
OPERATING
STORAGE
TEMPERATURE RANGE
-40 C TO +125 C (Note 1)
-10 C TO +60 C(Note 2)
RELATIVE HUMIDITY 85% MAX
(NOT DEWED)
TEMPERATURE RANGE
RATING
VOLTAGE
CURRENT
-
3
STORAGE
HUMIDITY RANGE
1.5 ~ 2 A (Note 3)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
20 mV AC MAX, 1 mA(DC OR 1000Hz)
30 mΩ MAX .
X
-
-
-
-
-
100 V DC.
500 MΩ MIN.
VOLTAGE PROOF
300 V AC FOR 1 min.
NO BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
X
-
-
10 TIMES INSERTIONS AND EXTRACTIONS.
VIBRATION
FREQUENCY 5 TO 600Hz
(5 TO 14.9Hz:16.5mm(p-p),14.9 TO 600Hz:73.0m/s²)
AT 3h FOR 8 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 7MIN ,
1s MIN.
② CONTACT RESISTANCE: 50 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
-
X
X
-
-
SHOCK
① NO ELECTRICAL DISCONTINUITY OF 7MIN ,
1s MIN.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
X
500m/s² DURATION OF PULSE 10ms AT 10 TIMES
FOR 3 DIRECTIONS.
-
-
-
LOCK STRENGTH
MEASURE BREAK STRENGTH OF THE LOCK BY ① 25 N MIN
PULLING THE CONNECTOR IN THE MATING
DIRECTION.
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
① CONTACT RESISTANCE: 50 m MAX.
② INSULATION RESISTANCE:500 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
-
X
EXPOSED AT 60 C, 90 ~ 95 %, 96 h.
-
-
-
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
X
TEMPERATURE -40→5 TO 35→125→5 TO 35C
-
-
TIME
30 →
5 → 30 → 5 min
UNDER 1000 CYCLES.
DRY HEAT
COLD
EXPOSED AT 125C, 1000 h.
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
X
-
-
EXPOSED AT -40C, 1000 h.
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
X
-
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
AN.SAIKI
CHECKED
DATE
3
△
1
DIS-T-00020612
TY.MOGI
20240403
20200806
20200805
20200805
REMARK
APPROVED
CHECKED
DESIGNED
HK.UMEHARA
(NOTE1)
(NOTE2)
Include the temperature rising by current.
OM.MIYAMOTO
YT.TAKANASHI
Apply to the condition of long term storage for unused products before harness assembly.
After harness assembly, operating temperature and humidity range is applied for interim
storage during transportation.
(NOTE3) For use with 2 to 4 Pin Connector : 2.0A applied
DRAWN
GY.YOON
20200805
For use with 6 to 16 Pin Connector : 1.5A applied
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-392584-00-00
GT50-28SCFA
SPECIFICATION SHEET
3
1/1
HIROSE ELECTRIC CO., LTD.
CL0760-1001-0-00 △
FORM HD0011-2-1