APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-30 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
250 V AC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
ACCORDING TO DRAWING.
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
×
×
×
×
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
1A DC.
30 mΩ MAX .
30 mΩ MAX .
×
×
-
-
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
DC 500 V
100 MΩ MIN.
INSULATION RESISTANCE
VOLTAGE PROOF
×
×
-
-
AC 650 V FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION
AND EXTRACTION FORCES
0.64×1.1 BY STEEL GAUGE.
INSERTION FORCE
3.4 N MAX.
0.4 N MIN.
×
×
×
-
-
-
EXTRACTION FORCE
MECHANICAL OPERATION
VIBRATION
① CONTACT RESISTANCE: 60 m MAX.
②
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
30 TIMES INSERTIONS AND EXTRACTIONS.
FREQUENCY 20 TO 200 Hz, 43.1m/s2,
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:60 m MAX.
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
AT 3h FOR 3 DIRECTIONS.
FREQUENCY 20 TO 50 Hz, 66.6m/ s2 AT 1 h.
SHOCK
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:60 m MAX.
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
×
-
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
① DURING APPLYING,MATING COMPLETELY.
② AFTER APPLYING,NO DEFECT OF
MATING PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
(STEADY STATE)
① CONTACT RESISTANCE: 60 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
EXPOSED AT 60℃, 90 TO 95%, 500h.
×
-
RAPID CHANGE OF
TEMPERATURE
① CONTACT RESISTANCE: 60 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
TEMPERATURE:-40→5 TO 35→85→5 TO 35℃
TIME: 30→5→30→5 MIN
UNDER 1000 CYCLES.
×
×
-
-
DRY HEAT
① CONTACT RESISTANCE: 60 m MAX.
②
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
EXPOSED AT 105℃, 300h.
COLD
① CONTACT RESISTANCE: 60 m MAX.
②
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
EXPOSED AT -55℃, 120h.
×
×
×
-
-
-
-
-
CORROSION, SALT MIST
RESISTANCE TO HSO3 GAS
① CONTACT RESISTANCE: 60 m MAX.
② NO HEAVY CORROSION.
EXPOSED IN 5% SALT WATER SPRAY FOR 96h.
EXPOSED IN 500 PPM FOR 8h.
① CONTACT RESISTANCE: 60 m MAX.
② NO HEAVY CORROSION.
RESISTANCE TO
SOLDERING HEAT
SOLDER TEMPERATURE, 260 C FOR
IMMERSION, DURATION, 10 s.
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
230 C FOR IMMERSION DURATION, 3 s.
-
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
KI.HIROKAWA
AM.YAMAUCHI
GYEONGMIN LEE
17.06.10
17.06.10
17.06.09
17.06.09
(NOTE1)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-165012-70-01
GT5-30/1.6-2.9SCF(70)
SPECIFICATION SHEET
0
CL755-0022-9-70
△
1/1
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1