APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
50 V DC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
1A DC.
50 mΩ MAX .
50 mΩ MAX .
×
×
-
-
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
×
×
-
-
500 V DC
100 MΩ MIN.
VOLTAGE PROOF
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
1
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 100 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE: 100 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
-
-
VIBRATION
FREQUENCY 20 TO 200 Hz,
43.1 m/s2 AT 3 h FOR
DIRECTIONS.
3
SHOCK
FREQUENCY 20 TO 50 Hz,
66.6 m/s2 AT 1 h .
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE: 100 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
① DURING APPLYING,MATING COMPLETELY.
② AFTER APPLYING,NO DEFECT OF MATING
PARTS.
×
×
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
(STEADY STATE)
EXPOSED AT 60 C, 90 ~ 95 %, 500 h.
① CONTACT RESISTANCE: 100 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
-
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→5 TO 35→ 85→5 TO 35C ① CONTACT RESISTANCE: 100 m MAX.
×
×
×
-
-
-
TIME
30 →
5
→ 30 → 5 min
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
UNDER 1000 CYCLES.
DRY HEAT
EXPOSED AT 105C, 300 h.
① CONTACT RESISTANCE: 100 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
EXPOSED AT -40C , 120 h.
① CONTACT RESISTANCE: 100 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
COLD
RESISTANCE TO SO2 GAS EXPOSED IN 25 PPM FOR 96h.
① CONTACT RESISTANCE: 100 m MAX..
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
×
×
-
-
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
EXPOSE 2 TIMES AT SPECIFIED
TEMPERATURE PROFILE.
SOLDERED AT SOLDER TEMPERATURE,
245 C FOR IMMERSION DURATION, 3s.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
NK.IKUTA
CHECKED
DATE
1
1
DIS-T-00001176
KI.HIROKAWA
NH.NAKATA
KI.HIROKAWA
NK.IKUTA
16.06.13
16.01.27
16.01.27
16.01.27
16.01.27
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
(NOTE1)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
APPLICABLE BOARD : 0.8 mm
CONTACT RESISTANCE OF OUTER CONDUCTOR AFTER ENVIRONMENTAL AND
DURABILITY TEST SHALL BE 150mΩ.
(NOTE2)
(NOTE3)
NK.IKUTA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-363889-00-00
GT36S-1P-DS(D)
SPECIFICATION SHEET
1
△
1/1
HIROSE ELECTRIC CO., LTD.
CL786-0049-0-00
FORM HD0011-2-1