APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
30 V AC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
MARKING
ELECTRIC CHARACTERISTICS
SIGNAL CONTACT 30 mΩ MAX .
SHIELD CONTACT 60 mΩ MAX .
SIGNAL CONTACT 30 mΩ MAX .
SHIELD CONTACT 60 mΩ MAX .
CONTACT RESISTANCE
1A DC.
×
×
-
-
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
500 V DC
100 MΩ MIN.
×
×
-
-
VOLTAGE PROOF
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERT ANS WITHDRAW THE SOCKET AT A SPEED INSERTION FORCE -N MAX
-
×
-
-
EXTRACTION FORCES
OF - mm/min INTO A PLUG.
WITHDRAWAL FORCE -N MIN.
① SIGNAL CONTACT 60 mΩ MAX .
SHIELD CONTACT 120 mΩ MAX .
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② SIGNAL CONTACT 60 mΩ MAX .
VIBRATION
SHOCK
FREQUENCY 20 TO 200 Hz,
43.1 m/s2 AT 3 h FOR 3 DIRECTIONS.
×
-
SHIELD CONTACT 120 mΩ MAX .
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② SIGNAL CONTACT 60 mΩ MAX .
ACCELERATION 981 m/s2 ,6ms AT 3 TIMES
FOR 3 DIRECTIONS.
×
×
-
-
SHIELD CONTACT 120 mΩ MAX .
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING AXIALLY AT ① DURING APPLYING,MATING COMPLETELY.
98N MAX.
② AFTER APPLYING,NO DEFECT OF MATING PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 60 C, 90 ~ 95 %, 500 h.
① SIGNAL CONTACT 60 mΩ MAX .
SHIELD CONTACT 120 mΩ MAX .
(STEADY STATE)
×
×
-
-
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① SIGNAL CONTACT 60 mΩ MAX .
SHIELD CONTACT 120 mΩ MAX .
RAPID CHANGE OF
TEMPERATURE
1000 CYCLES.
1CYCLE=-40C(30min)
→ROOM TEMPERATURE(5min) →85C(30min)
→ROOM TEMPERATURE(5min)
EXPOSED AT 105C, 1000 h.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① SIGNAL CONTACT 60 mΩ MAX .
SHIELD CONTACT 120 mΩ MAX .
DRY HEAT
×
×
-
-
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① SIGNAL CONTACT 60 mΩ MAX .
SHIELD CONTACT 120 mΩ MAX .
COLD
EXPOSED AT -40C , 1000 h.
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① SIGNAL CONTACT 60 mΩ MAX .
SHIELD CONTACT 120 mΩ MAX .
RESISTANCE TO SO2 GAS
EXPOSED IN 500 ppm FOR 8h.
×
×
×
-
-
-
② NO HEAVY CORROSION.
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDER TEMPERATURE, 260 C FOR
IMMERSION, DURATION, 10s.
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
SOLDERED AT SOLDER TEMPERATURE,
245 C FOR IMMERSION DURATION, 3s.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE TINNED SURFACE BEING IMMERSED.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(NOTE1)
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
AR.SHIRAI
16.10.12
16.10.12
16.10.12
16.10.12
INCLUDE THE TEMPERATURE RISING BY CURRENT.
KI.HIROKAWA
MH.SHOUJI
SK.HANAWA
(NOTE2)
APPLICABLE BOARD : 1.6±0.2
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-368205-00-00
GT32B-19DP-0.75H
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL782-0069-0-00
FORM HD0011-2-1