APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
30 V AC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
1A DC.
SIGNAL:30 mΩ MAX,SHIELD:60 mΩ MAX .
SIGNAL : 30 mΩ MAX,SHIELD:60 mΩ MAX .
×
×
-
-
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
500 V DC
100 MΩ MIN.
×
×
-
-
VOLTAGE PROOF
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERTION FORCE
― N MAX.
― BY STEEL GAUGE.
-
-
×
-
-
-
EXTRACTION FORCES
MECHANICAL OPERATION 30 TIMES INSERTIONS AND EXTRACTIONS.
EXTRACTION FORCE ― N MIN.
① CONTACT RESISTANCE:
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:
×
×
×
-
-
-
VIBRATION
SHOCK
FREQUENCY 20 TO 200 Hz,
43.1 m/s2 AT 3 h FOR 3 DIRECTIONS.
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:
×
×
×
-
-
-
ACCELERATION 980m/s2 ,6ms AT 3 TIMES
FOR 3 DIRECTIONS.
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① DURING APPLYING,MATING COMPLETELY.
② AFTER APPLYING,NO DEFECT OF MATING PARTS.
×
×
×
-
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
① CONTACT RESISTANCE:
EXPOSED AT 60 C, 90 ~ 95 %, 500 h.
×
-
(STEADY STATE)
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:
×
×
×
-
-
-
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→5 TO 35→ 85→5 TO 35C
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:
TIME
30 →
5 → 30 → 5 min
UNDER 1000 CYCLES.
×
×
×
-
-
-
DRY HEAT
COLD
EXPOSED AT 105C, 1000 h.
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:
×
×
-
-
EXPOSED AT -40C, 1000 h.
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
CONTACT RESISTANCE:
×
×
-
-
RESISTANCE TO SO2 GAS EXPOSED IN 500 PPM FOR 8 h.
SIGNAL:60 mΩ MAX,SHIELD:120 mΩ MAX .
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
RESISTANCE TO
SOLDERING HEAT
SPECIFIED TEMPERATURE PROFILE FOR
2CYCLES.
×
×
-
-
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
245 C FOR IMMERSION DURATION, 3 s.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE TINNED SURFACE BEING IMMERSED.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
AR.SHIRAI
17.03.14
17.03.13
17.03.13
17.03.13
(NOTE1)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
TH.MIZUGUCHI
TS.KUBOTA
(NOTE2)
APPLICABLE BOARD : 1.6±0.2.
TS.KUBOTA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-361828-11-01
GT32-4DP-1.5H(B)(11)
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
CL782-0062-6-11
FORM HD0011-2-1