APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
250 V AC
3
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
1A DC.
30 mΩ MAX.
30 mΩ MAX .
×
×
-
-
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
INSULATION RESISTANCE 500 V DC
100 MΩ MIN.
NO FLASHOVER OR BREAKDOWN.
×
×
-
-
VOLTAGE PROOF
650 V AC FOR 1 min.
MECHANICAL CHARACTERISTICS
INSERTION FORCE
EXTRACTION FORCE 0.1 TO 6.5 N.
① CONTACT RESISTANCE:60 mΩ MAX.
6.5 N MAX.
CONTACT INSERTION AND
×
×
12.3 × 9.0 BY STEEL GAUGE.
-
-
-
-
EXTRACTION FORCES
MECHANICAL OPERATION 30 TIMES INSERTIONS AND EXTRACTIONS.
×
×
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:60 mΩ MAX.
VIBRATION
SHOCK
FREQUENCY 20 TO 200 Hz,
×
×
×
-
-
-
43.1 m/s2 AT 3 h FOR 3 DIRECTIONS.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:60 mΩ MAX.
FREQUENCY 20 TO 50 Hz,
66.6 m/s2 AT 1 h .
×
×
×
-
-
-
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① DURING APPLYING, MATING COMPLETELY.
② AFTER APPLYING, NO DEFECT OF MATING PARTS.
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
×
×
-
-
ENVIRONMENTAL CHARACTERISTICS
① CONTACT RESISTANCE:60 mΩ MAX.
DAMP HEAT
EXPOSED AT 60 C, 90 TO 95 %, 500 h.
×
×
×
×
×
×
-
-
-
-
-
-
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:60 mΩ MAX. (NOTE3)
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→5 TO 35→ 85→5 TO 35C
TIME 30 → → 30 → 5 min
UNDER 1000 CYCLES.
5
① CONTACT RESISTANCE:60 mΩ MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:60 mΩ MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:60 mΩ MAX.
② NO HEAVY CORROSION.
DRY HEAT
EXPOSED AT 105C, 300 h.
×
×
×
×
×
×
-
-
-
-
-
-
COLD
EXPOSED AT -55C, 120 h.
CORROSION, SALT MIST
EXPOSED IN 5% SALT WATER SPRAY FOR
96 h.
RESISTANCE TO HSO3 GAS EXPOSED IN 500 PPM FOR 8 h.
① CONTACT RESISTANCE:60 mΩ MAX.
② NO HEAVY CORROSION.
×
×
×
-
-
-
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDER TEMPERATURE, 260 C FOR
IMMERSION, DURATION, 10 s.
Sn-3Ag-0.5Cu SOLDERED AT SOLDER
TEMPERATURE, 245 C
A NEW UNIFORM COATING OF SOLDER SHALL
COVER A MINIMUM OF 95 % OF THE SURFACE
BEING IMMERSED.
×
-
FOR IMMERSION DURATION, 3 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(NOTE1)
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
EJ.WAKATSUKI
TS.KUBOTA
20200326
20200325
20200325
20200219
INCLUDE THE TEMPERATURE RISING BY CURRENT.
(NOTE2)
(NOTE2)
APPLICABLE BOARD : 1.6±0.2
OVER 500 CYCLES : 120mΩ MAX. (OUTER CONTACT ONLY)
YK.MITSUISHI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-166544-55-00
GT17VB-8DP-DS-SB(55)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL767-0123-6-55
FORM HD0011-2-1