APPLICABLE STANDARD
OPERATING TEMPERATURE
STORAGE
TEMPERATURE RANGE
-40 C TO +105 C (NOTE1)
-40 C TO +105 C
RANGE
RATING
CURRENT
VOLTAGE
3 A
250 V AC
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
WITHSTAND VOLTAGE
1A DC.
30 mΩ MAX .
30 mΩ MAX .
×
×
-
-
20 mV AC MAX, 0.1 mA (DC OR 1000 Hz)
500 V DC
100 MΩ MIN.
NO FLASHOVER OR BREAKDOWN.
×
×
-
-
650 V AC FOR 1 min.
MECHANICAL CHARACTERISTICS
12.3 × 9.0 BY STEEL GAUGE.
INSERTION FORCE
6.5 N MAX .
CONTACT INSERTION AND
×
×
-
-
-
-
EXTRACTION FORCE 0.1 TO 6.5 N .
EXTRACTION FORCES
30 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE:60 mΩ MAX .
MECHANICAL OPERATION
×
×
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
FREQUENCY 20 TO 200 Hz,
43.1 m/s2 AT 3 h
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:60 mΩ MAX .
VIBRATION
SHOCK
×
×
×
-
-
-
FOR 3 DIRECTIONS.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
FREQUENCY 20 TO 50 Hz,
66.6 m/s2 AT 1 h .
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:60 mΩ MAX .
×
×
×
-
-
-
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
APPLYING A PULL FORCE THE MATING AXIALLY AT
98N MAX.
① DURING APPLYING,MATING COMPLETELY.
LOCK STRENGTH
×
×
-
-
② AFTER APPLYING,NO DEFECT OF MATING PARTS.
ENVIRONMENTAL CHARACTERISTICS
EXPOSED AT 60 C, 90 TO 95 %, 500 h.
① CONTACT RESISTANCE:60 mΩ MAX .
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:60 mΩ MAX . (NOTE3)
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:60 mΩ MAX .
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:60 mΩ MAX .
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:60 mΩ MAX .
② NO HEAVY CORROSION.
DAMP HEAT
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(STEADY STATE)
TEMPERATURE-40℃(30 min)→ROOM TEMP(5 min)→
+85℃(30 min)→ROOM TEMP(5 min)
UNDER 1000 CYCLES.
THERMAL SHOCK
1
△
EXPOSED AT 105C, 300 h.
DRY HEAT
COLD
EXPOSED AT -55C, 120 h.
EXPOSED IN 5% SALT WATER SPRAY FOR 96 h.
EXPOSED IN 500 PPM FOR 8 h.
CORROSION, SALT SPRAY
RESISTANCE TO SO2 GAS
① CONTACT RESISTANCE:60 mΩ MAX .
② NO HEAVY CORROSION.
SOLDER TEMPERATURE, 260 C FOR
IMMERSION, DURATION, 10 s.
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
A NEW UNIFORM COATING OF SOLDER SHALL
COVER A MINIMUM OF 95 % OF THE SURFACE
BEING IMMERSED.
×
-
245 C FOR IMMERSION DURATION, 3 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
YK.KANNO
CHECKED
DATE
1
1
DIS-T-00010826
EJ.WAKATSUKI
KI.HIROKAWA
EJ.WAKATSUKI
TS.KUBOTA
20210819
20200326
20200325
20200325
20200309
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
(NOTE1)
(NOTE2)
(NOTE3)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
APPLICABLE BOARD : 1.6±0.2
OVER 500 CYCLES : 120mΩ MAX. (OUTER CONTACT ONLY)
YK.MITSUISHI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-165752-56-00
PART NO.
CODE NO.
GT17V-10DP-DS-SB(56)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
1
△
1/1
CL0767-0069-2-56
FORM HD0011-2-1