APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C
-40 C TO 105 C (NOTE1)
CURRENT
VOLTAGE
250 V AC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
VOLTAGE PROOF
1A
DC.
SIGNAL:30 mΩ MAX, SHIELD:60mΩ MAX.
SIGNAL:30 mΩ MAX, SHIELD:60mΩ MAX.
×
×
-
-
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
500 V DC
1000 MΩ MIN.
×
×
-
-
650 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
- BY STEEL GAUGE.
INSERTION FORCE :
- N MAX.
-
-
×
-
-
-
EXTRACTION FORCES
WITHDRAWAL FORCE : - N MIN.
① CONTACT RESISTANCE:
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
SIGNAL:60 mΩ MAX, SHIELD:120mΩ MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:
×
×
×
-
-
-
VIBRATION
SHOCK
FREQUENCY 20 TO 400 Hz,
43.1 m/s2 AT 3 h FOR
3 DIRECTIONS.
SIGNAL:60 mΩ MAX, SHIELD:120mΩ MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:
×
×
×
-
-
-
FREQUENCY 20 TO 50 Hz,
66.6 m/s2 AT 1 h .
SIGNAL:60 mΩ MAX, SHIELD:120mΩ MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① DURING APPLYING,MATING COMPLETELY.
② AFTER APPLYING,NO DEFECT OF MATING PARTS.
×
×
×
-
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98 N MAX.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 60 C, 90 ~ 95 %, 500 h.
① CONTACT RESISTANCE:
×
-
(STEADY STATE)
SIGNAL:60 mΩ MAX, SHIELD:120mΩMAX
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:
×
×
×
-
-
-
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→5 TO 35→ 85→5 TO 35C
TIME 30 → → 30 → 5 min
5
SIGNAL:60 mΩ MAX, SHIELD:120mΩMAX
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:
UNDER 1000 CYCLES.
×
×
×
-
-
-
DRY HEAT
EXPOSED AT 105C, 300 h.
SIGNAL:60 mΩ MAX, SHIELD:120mΩMAX
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:
×
×
-
-
COLD
EXPOSED AT -40C , 120 h.
SIGNAL:60 mΩ MAX,SHIELD:120mΩMAX
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① CONTACT RESISTANCE:
×
×
-
-
RESISTANCE TO SO2 GAS
EXPOSED IN 500PPM FOR 8h.
SIGNAL:60 mΩ MAX, SHIELD:120mΩMAX
② NO HEAVY CORROSION.
×
×
-
-
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDER TEMPERATURE,260 C FOR
IMMERSION,DURATION,10s.
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
SOLDERED AT SOLDER TEMPERATURE,
245C FOR IMMERSION DURATION, 3 s.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(NOTE1)
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
EJ.WAKATSUKI
TS.KUBOTA
20200326
20200325
20200325
20200221
INCLUDE THE TEMPERATURE RISING BY CURRENT.
YK.MITSUISHI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-169632-55-00
GT17HG-4DP-2DSA(A)(55)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
CL767-0314-4-55
△
1/1
FORM HD0011-2-1