APPLICABLE STANDARD
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
-40 C TO +105 C (NOTE1)
-40 C TO +105 C
VOLTAGE
250 V AC
CURRENT
1
A
RATING
CHARACTERISTIC IMPEDANCE
50 Ω
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING
INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CENTER CONTACT 30 mΩ MAX .
OUTER CONTACT 60 mΩ MAX .
CENTER CONTACT 30 mΩ MAX .
OUTER CONTACT 60 mΩ MAX .
100 MΩ MIN.
CONTACT RESISTANCE
1A DC.
×
×
-
-
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
VOLTAGE PROOF
20 mV AC MAX, 0.1 mA(OR 1kHz)
500 V DC
×
×
×
-
-
-
650 V AC FOR 1 MIN.
FREQUENCY 0 TO 6 GHz
NO FLASHOVER OR BREAKDOWN.
VSWR 1.5 MAX.
VOLTAGE STANDING WAVE RATIO
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERTION FORCE
29.4 N MAX.
×
×
×
-
-
-
φ4.5 BY STEEL GAUGE.
EXTRACTION FORCES
WITHDRAWAL FORCE 2.9 N MIN.
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
①
②
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
×
-
-
-
FREQUENCY 20 TO 200 Hz, 43.1m/s2,
VIBRATION
SHOCK
① NO ELECTRICAL DISCONTINUITY OF 10 s.
AT 3h FOR 3 DIRECTIONS.
②
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
③
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
×
-
-
-
FREQUENCY 20 TO 50 Hz,66.6m/ s2 AT 1 h.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
②
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
③
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
×
-
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
① DURING APPLYING,MATING OMPLETELY.
② AFTER APPLYING,NO DEFECT OF MATING PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 60℃, 90 TO 95%, 500h.
×
-
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
(STEADY STATE)
② INSULATION RESISTANCE:100 M MIN.
×
×
×
-
-
-
③
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE:-40→5 TO 35→85→5 TO 35℃
TIME: 30→5→30→5 MIN
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
② INSULATION RESISTANCE:100 M MIN.
×
×
×
-
-
-
UNDER 1000 CYCLES.
③
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
DRY HEAT
EXPOSED AT 105℃, 300h.
EXPOSED AT -40℃, 120h.
EXPOSED IN 500 PPM FOR 8h.
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
②
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
-
-
COLD
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
②
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
-
-
RESISTANCE TO SO2 GAS
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
② NO HEAVY CORROSION.
×
×
-
-
RESISTANCE TO SOLDERING HEAT EXPOSE 2 TIMES AT SPECIFIED TEMPERATURE
PROFILE.
NO DEFORMATION IN CASE OF EXCESSIVE LOOSENESS
OF THE TERMINALS.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
A NEW UNIFORM COATING OF SOLDER SHALL COVER A
MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED.
×
-
245 ℃ FOR IMMERSION DURATION, 3 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(NOTE1)
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
MO.OKADA
20200604
20200604
20200604
20200309
INCLUDE THE TEMPERATURE RISING BY CURRENT.
(NOTE2)
APPLICABLE BOARD 1.6mm.
HK.WATANABE
YK.MITSUISHI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-167776-55-00
GT16GL-1P-H(55)D
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL766-0103-2-55
FORM HD0011-2-1