APPLICABLE STANDARD
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
-30 C TO +105 C (NOTE1)
-40 C TO +105 C
VOLTAGE
250 V AC
CURRENT
1
A
RATING
CHARACTERISTIC IMPEDANCE
50 Ω
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
ACCORDING TO DRAWING.
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
×
×
×
×
ELECTRIC CHARACTERISTICS
CENTER CONTACT 30 mΩ MAX .
OUTER CONTACT 60 mΩ MAX .
CENTER CONTACT 30 mΩ MAX .
OUTER CONTACT 60 mΩ MAX .
100 MΩ MIN.
CONTACT RESISTANCE
1A DC.
×
×
-
-
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
20 mV AC MAX, 0.1 mA(OR 1kHz)
INSULATION RESISTANCE
VOLTAGE PROOF
500 V DC
650 V AC FOR 1 MIN.
×
×
×
-
-
-
NO FLASHOVER OR BREAKDOWN.
VSWR 1.5 MAX.
VOLTAGE STANDING WAVE RATIO FREQUENCY 0 TO 6 GHz
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERTION FORCE
29.4 N MAX.
×
×
×
-
-
-
φ4.5 BY STEEL GAUGE.
EXTRACTION FORCES
WITHDRAWAL FORCE 2.9 N MIN.
MECHANICAL OPERATION
VIBRATION
30 TIMES INSERTIONS AND EXTRACTIONS.
①
②
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
×
-
-
-
FREQUENCY 20 TO 200 Hz, 43.1m/s2,
① NO ELECTRICAL DISCONTINUITY OF 10 s.
AT 3h FOR 3 DIRECTIONS.
②
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
③
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
×
-
-
-
FREQUENCY 20 TO 50 Hz,66.6m/ s2 AT 1 h.
SHOCK
① NO ELECTRICAL DISCONTINUITY OF 10 s.
②
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
③
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
×
-
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
① DURING APPLYING,MATING COMPLETELY.
② AFTER APPLYING,NO DEFECT OF MATING PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 60℃, 90 TO 95%, 500h.
×
-
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
(STEADY STATE)
② INSULATION RESISTANCE:100 M MIN.
③
×
×
×
-
-
-
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE:-40→5 TO 35→85→5 TO 35℃
TIME: 30→5→30→5 MIN
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
② INSULATION RESISTANCE:100 M MIN.
×
×
×
-
-
-
UNDER 1000 CYCLES.
③
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
DRY HEAT
EXPOSED AT 105℃, 300h.
EXPOSED AT -55℃, 120h.
EXPOSED IN 500 PPM FOR 8h.
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
②
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
-
-
COLD
①
CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
②
NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
×
×
-
-
RESISTANCE TO SO2 GAS
① CONTACT RESISTANCE: CENTER CONTACT 60 mΩ MAX .
OUTER CONTACT 120 mΩ MAX .
② NO HEAVY CORROSION.
×
×
-
-
RESISTANCE TO SOLDERING HEAT TOP OF IRON 350℃, 10 SEC.
NO DEFORMATION IN CASE OF EXCESSIVE LOOSENESS
OF THE TERMINALS.
A NEW UNIFORM COATING OF SOLDER SHALL COVER A
MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED.
SOLDERABILITY
TOP OF IRON 350℃, 3 SEC.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
MO.OKADA
20200331
20200331
20200331
20200318
(NOTE1)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
A CONFORMITY BOARD THICKNESS IS 1.6mm.
(NOTE2)
NK.IKUTA
YK.MITSUISHI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-165983-55-00
GT16G-1P-H(55)
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
CL766-0021-0-55
FORM HD0011-2-1