Power entry modules without line filter
www.schurter.com/PG05
GSF2
IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole
Snap-In Version
C14
C18
70° C
70° C
Description
Characteristics
- Two “locking” snappers reinforce connector against repeated or exces-
sive pull out force during plug removal
- Panel Mount:
Snap-in version from front side
- All single elements are already wired
- 2 Functions:
- Fuseholder on the inside of the equipment prevents accidental use of
incorrect fuse-links by the user
- Suitable for use in equipment according to IEC/UL 60950
Appliance Inlet protection class I or II, Fuseholder for fuse-links
5 x 20 mm on the rear-side 1 or 2 pole
Approvals
Other versions on request
- Ground terminal, solder/quick-connect, 90° to connector axis
- VDE Certificate Number: 40024857
- UL File Number: E93617, E96454
- CSA File Number: 38456
Weblinks
pdf-datasheet, html-datasheet, General Product Information, Approvals,
CE declaration of conformity, RoHS, CHINA-RoHS, Mating Connectors,
e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CAD-
Drawings, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
10 A / 250 VAC; 50 Hz
10 A / 125 VAC; 60 Hz
> 2.2 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
Appliance Inlet
Fuseholder
C14 / C18 acc. to IEC 60320,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C,
10 A, Protection Class I or II
1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole)
per pole
Allowable Operation Temp.
Degree of Protection
Protection Class
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class I or II acc. to IEC 61140
Quick connect terminals 4.8 x 0.8 mm
, Ground terminal: Solder terminals or
quick connect terminals tin-plated
Solder terminal on request
Snap-in: 1/1.2/1.5/2/2.5/3 mm
(other on request) (all steps with one
variant)
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
Admissible power acceptance at hig-
her ambient temperature see derating
curves
Terminal
Panel Thickness s
Material: Housing
Thermoplastic, black, UL 94V-0
1
Connectors