™
GENLINX II GS9020
Serial Digital Video Input Processor
DATA SHEET
FEATURES
DESCRIPTION
The GS9020 is specifically designed to deserialize SMPTE
259M serial digital signals. The inclusion of Error Detection
and Handling (EDH) ensures the integrity of the data being
received from the serial digital interface (SDI). Internal 75Ω
termination resistors allow INTERLINX™ seamless
connection with the GS9035 Reclocker or the GS9025
Receiver, thus providing a complete, high performance,
digital video input processor with EDH, digital sync signal
generation, and other system features.
• fully compatible with SMPTE 259M
• auto-standard operation to 540MHz
• embedded EDH and data processing core
• selectable loop through or re-serialized EDH-
processed serial output
• noise immune HVF timing signal outputs
• configurable FIFO reset pulse for clearing
downstream FIFOs
• ANC header and TRS-ID correction for all standards
• user controlled output blanking
• ITU-R-601 output clipping for active picture area
• ancillary data indication
The GS9020 also includes a parallel to serial converter and
NRZI scrambler to provide re-serialized, EDH compliant
data output. The EDH core implements EDH insertion and
extraction according to SMPTE RP-165. This core also
generates noise immune timing signals such as horizontal
sync, vertical blanking, field ID and ancillary data
identification. It also provides many system features such
as a FIFO reset pulse (which can be programmed to
coincide with either EAV or SAV), TRS-ID and ANC header
correction, user controlled output blanking and ITU-R-601
output clipping. The GS9020 has an I²C (Inter-Integrated
Circuit, I²C is a registered Trademark of Philips) serial
interface bus and an 8-bit parallel port for external access
to all error flags and device configuration bits.
• low system power
• selectable I²C interface or 8-bit parallel port for access
to EDH flags and device configuration bits
• EDH flags also available on dedicated pins
• seamless flag mapping to GS9021 EDH coprocessor
• 80 pin LQFP
APPLICATIONS
SMPTE 259M serial digital receiver for composite and
component standards including 4:4:4:4 at 540Mb/s with
EDH processing; Noise immune digital sync and timing
generation; Cost effective EDH insertion and checking for
serial routing and distribution applications.
ORDERING INFORMATION
PART NUMBER
GS9020-CFV
GS9020-CTV
PACKAGE
TEMPERATURE
0°C to 70°C
80 pin LQFP Tray
80 pin LQFP Tape
0°C to 70°C
SDOMODE
PARALLEL TO
SDO
SERIAL
CONVERTER
WITH SCRAMBLER
0
1
BUF
SDO
10
FRAMED
DATA [9:0]
DESCRAMBLER
DOUT[9:0]
FIFO_RESET
HVF
SDI
SDI
10
SERIAL TO
PARALLEL
CONVERTER
BUF
SYNC
DETECTOR
5
4
EDH
CLIP_TRS
AND DATA
PROCESSING
CORE
SCI
SCI
ANC_CHKSM
PCLK OUT
RESET
ALIGNING
CONTROL
UNIT
BUF
SCRAMLER
PRESCALER
STANDARDS
INDICATOR
HOSTIF
TRS_ERR
7
DEDICATED
FLAG PORT
PCLKOUT
BLOCK DIAGRAM
Revision Date: November 1999
Document No. 521 - 66 - 05
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com
www.gennum.com