™
GENLINX II GS9000D
Serial Digital Decoder
DATA SHEET
FEATURES
DEVICE DESCRIPTION
• fully compatible with SMPTE 259M-ABC
The GS9000D is a CMOS integrated circuit specifically
designed to deserialize SMPTE 259M serial digital signals
at data rates up to 270Mb/s. The GS9000D is a pin and
functional equivalent to the GS9000C, with the exception of
SDI input levels which are compatible for direct interfacing
to the GS7025, GS9025A and GS9035A.
• decodes 8 and 10 bit serial digital signals for data rates to
270Mb/s
• recommended alternative to GS9000C for use when
interfacing directly to GS7025, GS9025A or GS9035A
• incorporates automatic standards selection
• 325mW power dissipation at 270MHz clock rate
• Pb-free and Green
The device incorporates a descrambler, serial to parallel
convertor, sync processing unit, sync warning unit and
automatic standards select circuitry.
• operates from single +5 or -5 volt supply
• 28 pin PLCC packaging
Differential pseudo-ECL inputs for both serial clock and
data are internally level shifted to CMOS levels. Digital
outputs such as parallel data, parallel clock, HSYNC, Sync
Warning and Standard Select are all TTL compatible.
APPLICATIONS
•
4ƒSC and 4:2:2 serial digital interfaces
The GS9000D is packaged in a 28 pin PLCC and operates
from a single 5 volt, 5ꢀ power supply.
•
Automatic standards select controller for serial routing
and distribution applications
ORDERING INFORMATION
PART NUMBER
PACKAGE
28 Pin PLCC
TEMPERATURE
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
Pb-FREE AND GREEN
GS9000DCPJ
No
No
GS9000DCTJ
28 Pin PLCC Tape
28 Pin PLCC
GS9000DCPJE3
Yes
Yes
GS9000DCTJE3
28 Pin PLCC Tape
GS9000D
SERIAL DATA IN
SERIAL DATA IN
30 - BIT
SHIFT REG
PARALLEL DATA
OUT (10 BITS)
LEVEL
SHIFT
SP
DESCRAMBLER
SERIAL CLOCK IN
SERIAL CLOCK IN
SYNC DETECT
(3FF 000 000 HEX)
LEVEL
SHIFT
SCLK
Word
Boundary
PARALLEL
TIMING
GENERATOR
PARALLEL CLOCK
OUT
Sync
SYNC CORRECTION
ENABLE
SYNC CORRECTION
Sync Error
HSYNC OUTPUT
SYNC WARNING
(Schmitt Trigger
Comparator)
SYNC WARNING
CONTROL
SYNC WARNING
FLAG
AUTO STANDARD SELECT
SS0
SS1
2 BIT
OSC
STANDARDS SELECT
CONTROL
COUNTER
Hsync Reset
FUNCTIONAL BLOCK DIAGRAM
Revision Date: June 2004
Document No. 18784 - 3
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com
www.gennum.com