Datasheet > 存储 > SRAM> GS88018T-66IT

GS88018T-66IT

更新时间： 2024-11-20 13:08:03

品牌	Logo	应用领域
GSI		存储静态存储器
页数	文件大小	规格书
25页	1033K
描述
Cache SRAM, 512KX18, 18ns, CMOS, PQFP100, TQFP-100

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

GS88018T-66IT 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	零件包装代码：	QFP
包装说明：	LQFP,	针数：	100
Reach Compliance Code：	compliant	ECCN代码：	3A991.B.2.B
HTS代码：	8542.32.00.41	风险等级：	5.7
Is Samacsys：	N	最长访问时间：	18 ns
其他特性：	FLOW-THROUGH OR PIPELINED ARCHITECTURE	JESD-30 代码：	R-PQFP-G100
长度：	20 mm	内存密度：	9437184 bit
内存集成电路类型：	CACHE SRAM	内存宽度：	18
湿度敏感等级：	3	功能数量：	1
端子数量：	100	字数：	524288 words
字数代码：	512000	工作模式：	SYNCHRONOUS
最高工作温度：	85 °C	最低工作温度：	-40 °C
组织：	512KX18	封装主体材料：	PLASTIC/EPOXY
封装代码：	LQFP	封装形状：	RECTANGULAR
封装形式：	FLATPACK, LOW PROFILE	并行/串行：	PARALLEL
峰值回流温度（摄氏度）：	NOT SPECIFIED	认证状态：	Not Qualified
座面最大高度：	1.6 mm	最大供电电压 (Vsup)：	3.6 V
最小供电电压 (Vsup)：	3.135 V	标称供电电压 (Vsup)：	3.3 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	14 mm
Base Number Matches：	1

GS88018T-66IT 数据手册

Preliminary

GS88018/32/36T-11/11.5/100/80/66

100-Pin TQFP

Commercial Temp

Industrial Temp

100 MHz–66 MHz

512K x 18, 256K x 32, 256K x 36

8Mb Sync Burst SRAMs

3.3 V V

3.3 V and 2.5 V I/O

interleave order with the Linear Burst Order (LBO) input. The

Burst function need not be used. New addresses can be loaded

on every cycle with no degradation of chip performance.

Features

• FT pin for user-configurable flow through or pipelined

operation

• Single Cycle Deselect (SCD) operation

• 3.3 V +10%/–5% core power supply

• 2.5 V or 3.3 V I/O supply

• LBO pin for Linear or Interleaved Burst mode

• Internal input resistors on mode pins allow floating mode pins

• Default to Interleaved Pipelined mode

• Byte Write (BW) and/or Global Write (GW) operation

• Common data inputs and data outputs

• Clock Control, registered, address, data, and control

• Internal self-timed write cycle

Flow Through/Pipeline Reads

The function of the Data Output Register can be controlled by

the user via the FT mode pin (Pin 14). Holding the FT mode

pin low places the RAM in Flow Through mode, causing

output data to bypass the Data Output Register. Holding FT

high places the RAM in Pipeline mode, activating the rising-

edge-triggered Data Output Register.

SCD Pipelined Reads

The GS88018/32/36T is a SCD (Single Cycle Deselect)

pipelined synchronous SRAM. DCD (Dual Cycle Deselect)

versions are also available. SCD SRAMs pipeline deselect

commands one stage less than read commands. SCD RAMs

begin turning off their outputs immediately after the deselect

command has been captured in the input registers.

• Automatic power-down for portable applications

• 100-lead TQFP package

-11

-11.5

-100

10 ns 12.5 ns 15 ns

5 ns

225 mA 225 mA 225 mA 200 mA 185 mA

-80

-66

Pipeline tCycle 10 ns

10 ns

Byte Write and Global Write

3-1-1-1

t_KQ

I_DD

4.0 ns 4.0 ns 4.0 ns 4.5 ns

Byte write operation is performed by using Byte Write enable

(BW) input combined with one or more individual byte write

signals (Bx). In addition, Global Write (GW) is available for

writing all bytes at one time, regardless of the Byte Write

control inputs.

Flow

Through

2-1-1-1

t_KQ

tCycle

I_DD

11 ns 11.5 ns 12 ns

15 ns 15 ns 15 ns

180 mA 180 mA 180 mA 175 mA 165 mA

14 ns

15 ns

18 ns

20 ns

Sleep Mode

Low power (Sleep mode) is attained through the assertion

(High) of the ZZ signal, or by stopping the clock (CK).

Memory data is retained during Sleep mode.

Functional Description

Applications

Core and Interface Voltages

The GS88018/32/36T is a 9,437,184-bit (8,388,608-bit for x32

version) high performance synchronous SRAM with a 2-bit

burst address counter. Although of a type originally developed

for Level 2 Cache applications supporting high performance

CPUs, the device now finds application in synchronous SRAM

applications, ranging from DSP main store to networking chip

set support.

The GS88018/32/36T operates on a 3.3 V power supply and all

inputs/outputs are 3.3 V- and 2.5 V-compatible. Separate

output power (V_DDQ) pins are used to decouple output noise

from the internal circuit.

Controls

Addresses, data I/Os, chip enables (E1, E2, E3), address burst

control inputs (ADSP, ADSC, ADV), and write control inputs

(Bx, BW, GW) are synchronous and are controlled by a

positive-edge-triggered clock input (CK). Output enable (G)

and power down control (ZZ) are asynchronous inputs. Burst

cycles can be initiated with either ADSP or ADSC inputs. In

Burst mode, subsequent burst addresses are generated

internally and are controlled by ADV. The burst address

counter may be configured to count in either linear or

Rev: 1.11 8/2000

1/25

Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.

12 3 4 5 6 7...25

中文翻译

下载PDF

与GS88018T-66IT相关器件

型号	品牌	获取价格	描述	数据表
GS88018T-80	GSI	获取价格	512K x 18, 256K x 32, 256K x 36 8Mb Sync Burst SRAMs
GS88018T-80I	GSI	获取价格	512K x 18, 256K x 32, 256K x 36 8Mb Sync Burst SRAMs
GS88018T-80IT	GSI	获取价格	Cache SRAM, 512KX18, 14ns, CMOS, PQFP100, TQFP-100
GS88018TT-100	GSI	获取价格	Standard SRAM, 512KX18, 12ns, CMOS, PQFP100
GS88018TT-100I	GSI	获取价格	Standard SRAM, 512KX18, 12ns, CMOS, PQFP100
GS88018TT-11	GSI	获取价格	Standard SRAM, 512KX18, 11ns, CMOS, PQFP100
GS88018TT-11.5I	GSI	获取价格	Standard SRAM, 512KX18, 11.5ns, CMOS, PQFP100
GS88018TT-80I	GSI	获取价格	Standard SRAM, 512KX18, 14ns, CMOS, PQFP100
GS88019AT-133T	GSI	获取价格	Cache SRAM, 512KX18, 3.5ns, CMOS, PQFP100, TQFP-100
GS88019AT-150IT	GSI	获取价格	Cache SRAM, 512KX18, 3.3ns, CMOS, PQFP100, TQFP-100

与GS88018T-66IT相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

25
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

17
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

49
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

46

产品中心

服务支持

精选活动

关于我们

帮助中心

GS88018T-66IT

GS88018T-66IT 技术参数

GS88018T-66IT 数据手册

与GS88018T-66IT相关器件

与GS88018T-66IT相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

GS88018T-66IT

GS88018T-66IT 技术参数

GS88018T-66IT 数据手册

与GS88018T-66IT相关器件

与GS88018T-66IT相关文章

您还可以找

您在本页遇到什么问题？