GS1531 HD-LINX® II
Multi-Rate Serializer with ClockCleaner™
GS1531 Data Sheet
Key Features
Description
•
SMPTE 292M and SMPTE 259M-C compliant
scrambling and NRZ → NRZI encoding (with
bypass)
The GS1531 is a multi-standard serializer with an
integrated cable driver. When used in conjunction with
the GO1555/GO1525* Voltage Controlled Oscillator, a
transmit solution can be realized for HD-SDI, SD-SDI
•
•
DVB-ASI sync word insertion and 8b/10b encoding
and DVB-ASI applications.
Rejection of more than 300ps jitter on the input
PCLK
The device features an internal PLL, which can be
configured for loop bandwidth as narrow as 100kHz.
Thus the GS1531 can tolerate in excess of 300ps jitter
on the input PCLK and still provide output jitter well
within SMPTE specification. Connect the output clocks
from Gennum’s GS4911 clock generator directly to the
GS1531’s PCLK input and configure the GS1531’s loop
bandwidth accordingly.
•
User selectable additional processing features
including:
•
CRC, ANC data checksum, and line number
calculation and insertion
•
•
TRS and EDH packet generation and insertion
illegal code remapping
•
•
•
Internal flywheel for noise immune TRS generation
20-bit / 10-bit CMOS parallel input data bus
In addition to serializing the input, the GS1531 performs
NRZ-to-NRZI encoding and scrambling as per SMPTE
292M/259M-C when operating in SMPTE mode. When
operating in DVB-ASI mode, the device will insert K28.5
sync characters and 8b/10b encode the data prior to
serialization.
148.5MHz / 74.25MHz / 27MHz / 13.5MHz parallel
digital input
•
•
Automatic standards detection and indication
1.8V core power supply and 3.3V charge pump
power supply
Parallel data inputs are provided for 10-bit multiplexed
or 20-bit demultiplexed formats at both HD and SD
signal rates. An appropriate parallel clock input signal is
also required.
•
•
•
•
3.3V digital I/O supply
JTAG test interface
Available in a Pb-free package
small footprint (11mm x 11mm)
The integrated cable driver features an output mute on
loss of parallel clock, high impedance mode, adjustable
signal swing, and automatic dual slew rate selection
depending on HD/SD operational requirements.
Applications
•
•
•
SMPTE 292M Serial Digital Interfaces
The GS1531 also includes a range of data processing
functions including automatic standards detection and
EDH support. The device can also insert TRS signals,
calculate and insert line numbers and CRC’s, re-map
illegal code words and insert SMPTE 352M payload
identifier packets. All processing features are optional
and may be enabled/disabled via external control pin(s)
and/or host interface programming.
SMPTE 259M-C Serial Digital Interfaces
DVB-ASI Serial Digital Interfaces
*For new designs use GO1555
30573 - 7 February 2008
1 of 50
www.gennum.com