EVBUM2709/D
Compact Intelligent Power
Module Based Motor
Evaluation Board with
Interleaved Power Factor
Correction
www.onsemi.com
EVAL BOARD USER’S MANUAL
This User Guides refers to revision 0.4 of the
SECO−1KW−MCTRL−GEVB evaluation board.
Description
This user guide provides practical guidelines for compact
Intelligent Power Module (IPM) evaluation board with
interleaved
power
factor
Correction
(PFC)
SECO−1KW−MCTRL−GEVB including its main features
and key data. The evaluation board is a complex solution
which allows to control different types of motors (AC
induction motor, PMSM, BLDC) by using various control
algorithms implemented to microcontroller which can be
connected via Arduino Due headers. The board was
developed to support customers during their first steps
designing application with IPM and PFC.
The design was tested as described in this document but
not qualified regarding safety requirements or
manufacturing and operation over the whole operating
temperature range or lifetime. The board is intended for
functional testing under laboratory conditions and by
trained specialists only.
Features
• 850 W complete motor control solution with AC mains
supply 230 Vrms 15 %, EMI filter, 2−channel
interleaved Power Factor Correction (PFC)
• Highly integrated power module NFAQ1060L36T
containing an inverter power stage for a high voltage
3−phase inverter in a DIP−S3 package
Collateral
• SECO−1KW−MCTRL−GEVB
• NFAQ1060L36T
• NCP1632
• PFC stage using NCP1632 controller, FCPF125N65S3
NMOS power transistors and FFSPF1065A diodes
• DC/DC converter producing auxiliary power supply
15VDC – non−isolated buck converter using NCP1063
• 3 phase current measurement using 3xNCS2003
operational amplifier
• FCPF125N65S3
• NCP1063
• NCS2003
• NCS2250
• Over current protection using NCS2250 comparator
Attention: The SECO−1 kW−MCTRL−GEVB is powered by AC Mains, and exposed to high voltage. Only trained
personnel should manipulate and operate on the system. Ensure that all boards are properly connected before
powering, and that power is off before disconnecting any boards. It is mandatory to read the Safety Precautions
section before manipulating the board. Failure to comply with the described safety precautions may result in
personal injury or death, or equipment damage.
© Semiconductor Components Industries, LLC, 2019
1
Publication Order Number:
February, 2020 − Rev. 2
EVBUM2709/D