Resistors
QSOP Thin Film on Ceramic
Resistor Networks
QSOP-C Series
Reliable, no internal cavity
High resistor density - .025” lead spacing
Standard JEDEC 16, 20, and 24 pin packages
Ultra-stable TaN resistors on ceramic substrate
Lower crosstalk than silicon substrate types
All parts are Pb-free and comply with EU Direcꢀve 2011/65/EU amended by (EU) 2015/863 (RoHS3)
QSOP-C resistor networks are high density, low crosstalk networks which combine high precision with the sta-
bility and reliability associated with the self-passivaꢀng tantalum nitride film system.
Electrical Data
Resistance Range
Environmental Data
100R – 150K
To 0.1%
Test Per
Typical
Max Delta
R
MIL-PRF-83401
Delta R
Absolute Tolerance
Ratio Tolerance to R1
Absolute TCR
To 0.05%
Thermal Shock
0.02%
0.1%
0.1%
To 25ppm/°C
Power Conditioning
0.03%
0.03%
0.02%
Tracking TCR
To 5ppm/°C
Element Power Rating @ 70°C
High Temperature Exposure
Short-time Overload
0.05%
0.05%
100mW
50mW
Isolated Schematic
Bussed Schematic
16-Pin
750mW
Package Power Rating @ 70°C
20-Pin
24-Pin
1.0W
1.0W
Rated Operating Voltage
______
Low Temperature Storage
Life
0.03%
0.05%
0.05%
0.1%
100 Volts
(not to exceed P x R)
√
Operating Temperature
Noise
-55°C to +125°C
<-25dB
General Note
BI Technologies IRC Welwyn
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronics.com/resistors
© TT Electronics plc
08.21