Incremental encoders
Shaft with clamping or synchro flange, PTB approved
Resolution 50 or 500 pulses
GPI0W
Features
– Encoder with shaft ø10 mm or ø6 mm
– PTB approved
– Clamping flange or synchro flange
– High rotation speed max.10000 rpm
– Compact design
– High resistance to shock and vibrations
GPI0W with clamping flange
Technical data - electrical ratings
Technical data - mechanical design
Voltage supply
10...30 VDC
Housing
Shaft
ø58 mm
Reverse polarity protection Yes
ø6 mm (synchro flange)
ø10 mm (clamping flange)
Consumption w/o load
Resolution (steps/turn)
Reference signal
Sensing method
Output frequency
Output signals
≤30 mA (24 VDC)
Flange
Clamping or synchro flange
50...500
Protection DIN EN 60529 IP 54
Zero pulse, width 90°
Optical
Operating speed
≤10000 rpm
Starting torque
≤0.015 Nm IP 54
14.5 gcm²
≤150 kHz
Rotor moment of inertia
Admitted shaft load
A 90° B + N
≤20 N axial
≤40 N radial
Output circuit
Push-pull short-circuit proof
DIN EN 61000-6-2
DIN EN 61000-6-4
UL approval / E63076
Interference immunity
Emitted interference
Approval
Materials
Housing: aluminium
Flange: aluminium
Operating temperature
Relative humidity
Resistance
-25...+85 °C
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
Weight approx.
E-connection
250 g
Cable
Output signals
Clockwise rotating direction when looking at flange.
Track A
Track B
90°
Zero pulse
www.baumerivo.com
1