GLC65 GLOBAL LOW-COST SWITCHERS
FEATURES:
• Patent Pending
• 4.1W/in3
• Compact (3.0" x 5.0" x 1.06")
• Ultra-high efficiency (up to 94%)
• Meets harmonic requirements of IEC1000-3-2, Class A
• EMI compliance to CISPR22 Class B
• Approved to UL2601, EN60601, CSA22.2 No. 601.1
• 2-year warranty
•
marked to LVD
EMI/EMC Compliance
All models include built-in EMI filtering to meet the following emissions
requirements:
SPECIFICATIONS:
AC Input
90-264Vac, 47-63Hz single phase.
EMI SPECIFICATIONS
Conducted Emissions
Static Discharge
RF Field Susceptibility
Fast Transients/Bursts
Surge Susceptibility
COMPLIANCE LEVEL
EN55022 Class B; FCC Class B
EN61000-4-2, 6 kV contact, 8 kV air
EN61000-4-3, 3 V/meter
EN61000-4-4, 2 kV, 5 kHz
EN61000-4-5, 1 kV diff., 2 kV com.
Input Current
Meets input current harmonic requirements of IEC1000-3-2. Maximum
input current at minimum output voltage and output overload will be less
than 1.7A.
Output Power
Normal continuous output power is 65W, 75W peak for 60 sec. The
3.3Vdc unit is 36.3W and the 5Vdc unit is 55W continuous.
Safety
All GLC models are approved to UL1950, CSA22.2 No. 234 Level 3,
IEC950 and EN60950. Consult factory for approval status.
Hold-Up Time
20mSec from loss of AC input at 65W load, from 120Vac input.
Overload Protection
Fully protected against short circuit and output overload. Short circuit
protection is cycling type power limit on outputs 1 & 2; foldback type on
output 3.
Output Noise
0.5%RMS, 1% pk-pk, 20MHz bandwidth, differential mode. Measured
with scope probe directly across output terminals of the power supply
with load terminated with 0.1µF capacitor.
Transient Response
Main output: 500µSec typical response time for return to within 0.5% of
final value for a 50% load step within the regulation limits of minimum and
maximum load, ∆i/∆t<0.2A/µSec. Maximum voltage deviation is 3.5%.
Startup/shutdown overshoot less than 3%.
Voltage Adjustment
Adjustable potentiometer capable of ±5% change from nominal setting.
Overload Protection
Factory set to begin power limiting at approximately 80W.
Efficiency
88 to 94% minimum at full rated load, nominal input voltage, depending
on model.
Leakage Current
Under normal conditions, leakage current is 425µA with 132Vac @ 60Hz
input.
Environmental
Designed for 0 to 50°C operation at full rated output power; derate
output current and total output power by 2.5% per °C above 50°C. See
Environmental and Packaging Specifications (p. 11) for additional
information.
Inrush Current
Inrush is limited by internal thermistor. The inrush at 240Vac, averaged
over the first AC half-cycle under cold start conditions will not exceed
37A.
Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.
2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 805-486-4565 FAX 805-487-8911 • www.condorpower.com/
•
•
•
44