GI2401 THRU GI2404
GLASS PASSIVATED PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts
Forward Current - 16.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
TO-220AB
0.185 (4.70)
0.415 (10.54) MAX.
0.175 (4.44)
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
0.148 (3.74)
0.055 (1.39)
0.045 (1.14)
DIA.
0.113 (2.87)
0.103 (2.62)
♦ Low power loss
0.145 (3.68)
0.135 (3.43)
♦ High surge capability
0.560 (14.22)
0.530 (13.46)
♦ Superfast recovery times for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.16" (4.06mm) from case for 10 seconds
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.330 (8.38)
0.635 (16.13)
0.625 (15.87)
PIN
1.148 (29.16)
1.118 (28.40)
2
1
3
0.110 (2.79)
0.100 (2.54)
0.160 (4.06)
0.140 (3.56)
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body over
passivated chips
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.022 (0.56)
0.014 (0.35)
0.105 (2.67)
0.095 (2.41)
Polarity: As marked
Mounting Position: Any
0.205 (5.20)
0.195 (4.95)
PIN 2
PIN 1
PIN 3
CASE
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VRRM
VRMS
VDC
GI2401
50
GI2402
100
70
GI2403
150
GI2404
200
UNITS
Volts
Volts
Volts
Maximum recurrent peak reverse voltage
Maximum RMS voltage
35
105
140
Maximum DC blocking voltage
50
100
150
200
Maximum average forward rectified current
at TC=125°C
I(AV)
16.0
Amps
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TC=125°C
IFSM
125.0
Maximum instantaneous forward voltage per leg at:
IF=4A, TJ=25°C
0.975
0.900
0.800
0.895
IF=8A, TJ=25°C
IF=4A, TJ=100°C
IF=8A, TJ=100°C
VF
Volts
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
50.0
150.0
5.0
500.0
IR
µA
Maximum reverse recovery time per leg (NOTE1)
Typical junction capacitance per leg (NOTE 2)
Typical thermal resistance per leg (NOTE 3)
trr
35.0
85.0
ns
CJ
pF
RΘJA
RΘJC
16.0
2.2
°C/W
°C
Operating junction and storage temperature range
TJ, TSTG
-65 to +150
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to case and from junction to ambient per leg mounted on heatsink
4/98