GI1101 THRU GI1104
GLASS PASSIVATED FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 200 Volts
Forward Current - 2.5 Amperes
FEATURES
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ Superfast recovery time for high efficiency
♦ Low forward voltage, high current capability
♦ Capable of meeting environmental standards
of MIL-S-19500
DO-204AP
0.034 (0.86)
0.028 (0.71)
1.0 (25.4)
DIA.
MIN.
♦ Hermetically sealed package
♦ Low Leakage
♦ High surge capability
0.240 (6.1)
MAX.
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.150 (3.8)
0.100 (2.5)
DIA.
1.0 (25.4)
MIN.
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Plated axial leads, solderable per MIL-STD 750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Dimensions in inches and (millimeters)
*
Brazed lead assembly is covered by Patent No. 3,930,306
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VRRM
VRMS
VDC
GI1101
50
GI1102
100
70
GI1103
150
GI1104
200
UNITS
Volts
Volts
Volts
Maximum repetitive peak reverse voltage
Maximum RMS voltage
35
105
140
Maximum DC blocking voltage
50
100
150
200
Maximum average forward rectified current
0.375" (9.5mm) lead length (SEE FIG.1)
I(AV)
IFSM
VF
2.5
2.0
Amps
Amps
Volts
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at rated TL
50.0
Maximum instantaneous forward voltage at 2.0A
0.975
1.25
(NOTE 5)
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
2.0
50.0
10.0
200.0
IR
trr
µA
ns
pF
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
25.0
50.0
CJ
45.0
Typical thermal resistance (NOTE 1)
RΘJA
RΘJL
65.0
20.0
°C/W
°C
(NOTE 4)
Operating junction and storage temperature range
TJ, TSTG
-65 to +175
-65 to +150
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length and mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper pads
(4) Thermal resistance from junction to lead at 0.375" (9.5mm) lead length with both leads attached to heat sinks
(5) Tested at IF=1.0A
4/98