GBPC1005 THRU GBPC110
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes
Case Style GBPC1
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
0.630 (16.00)
0.590 (14.98)
Classification 94V-0
0.445 (11.30)
0.405 (10.29)
♦ This series is UL listed under Recognized Component Index,
file number E54214
HOLE FOR
#6 SCREW
0.158 (4.01)
♦ Glass passivated chip junctions
AC
0.142 (3.61)
DIA.
♦ High case dielectric with standing voltage of 1500 V
RMS
0.445 (11.30)
0.405 (10.29)
0.630 (16.00)
0.590 (14.98)
♦ Typical I less than 0.1µA
R
♦ High surge current capability
AC
♦ Ideal for printed circuit boards
♦ High temperature soldering guaranteed:
260°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3kg) tension
0.094 (2.4) x 45 degrees
0.128 (3.25)
0.048 (1.22)
0.040 (1.02) TYP.
0.032 (0.81)
0.028 (0.71)
DIA.
0.750
(19.05)
MIN.
MECHANICAL DATA
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
0.200 (5.08)
0.160 (4.06)
Polarity shown on side of case: Positive lead by beveled corner
Mounting Position: Any
(NOTE 1)
Mounting Torque: 5.0 in. - lb. max.
Weight: 0.1 ounce, 2.8 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
GBPC
1005
GBPC
101
GBPC
102
GBPC
104
GBPC
106
GBPC GBPC
108 110
SYMBOLS
VRRM
VRMS
VDC
UNITS
Maximum repetitive peak reverse voltage
Maximum RMS bridge input voltage
Maximum DC blocking voltage
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800 1000 Volts
560 700 Volts
100
800 1000 Volts
Maximum average forward
rectified output current at
TC=60°C (NOTE 2)
TA=25°C (NOTE 3)
3.0
2.0
I(AV)
Amps
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method) TC=60°C
IFSM
I2t
60.0
15.0
1.0
Amps
A2sec
Volts
Rating for fusing (t<8.3ms)
Maximum instantaneous forward voltage drop
per leg at 1.5 Amperes
VF
Maximum DC reverse current at rated
DC blocking voltage per leg
TA= 25°C
TA=125°C
5.0
500.0
IR
µA
pF
Typical junction capacitance per leg (NOTE 4)
Typical thermal resistance per leg (NOTE 2)
CJ
21.0
RΘJA
RΘJC
12.0
8.0
°C/W
°C
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
NOTES:
(1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw
(2) Unit mounted on 4.0 x 4.0 x 0.11" thick (10.5 x 10.5 x 0.3cm) Al. Plate
(3) Unit mounted on P.C.B. at 0.375" (9.5mm) lead length with 0.5 x 0.5" (12 x 12mm) copper pads
(4) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
4/98