Global Mixed-mode Technology Inc.
G782
±1°C Remote and Local Temperature Sensor with
SMBus Serial Interface
Features
General Description
Three Channels: Measures Two Remote and
The G782 is a precise digital thermometer that re-
ports the temperature of 2 remote sensors and its
own package. The remote sensors are diode-
connected transistors typically a low-cost, easily
mounted 2N3904 NPN type that replace conventional
thermistors or thermocouples. Remote accuracy is
±1°C with no calibration needed. It also has a
build-in noise filtering function in remote sensor
measuring the diode temperature. The remote chan-
nel can also measure the die temperature of other
ICs, such as microprocessors, that contain an
on-chip, diode-connected transistor.
One Local Temperatures
Measure Thermal Diode with a Transistor Model
Support Single-Core, Dual-Core and Quad-Core
CPU Application
No Calibration Required
Built-in Noise-Buster for Remote Sensor
SMBus 2-Wire Serial Interface
Programmable Under/Overtemperature Alarms
Supports SMBus Alert Response
Accuracy:
±1°C (+60°C to +100°C, remote)
±3°C (+60°C to + 100°C, local)
320µA (typ) Average Supply Current During
Conversion
The 2-wire serial interface accepts standard System
Management Bus (SMBus) Write Byte, Read Byte,
Send Byte, and Receive Byte commands to program
the alarm thresholds and to read temperature data.
The data format is 11bits plus sign, with each bit cor-
responding to 0.125°C, in two’s-complement format.
Measurements can be done automatically and
autonomously, with the conversion rate programmed
by the user or programmed to operate in a sin-
gle-shot mode. The adjustable rate allows the user to
control the supply current drain.
Measure Thermal Diode with Transistor Model
Support 45nm, 65nm and 90nm CPU thermal
diode
+3V to +5.5V Supply Range
Small 8-Lead SOP , MSOP and TDFN Package
Remote Temperature Measurment up to 160°C
by using offset shifting method (see “Measure
Remote Temperature Higher Than 127°C” sec-
tion)
Applications
Desktop and Notebook
Computers
Smart Battery Packs
LAN Servers
The G782 is available in a small, 10-pin MSOP sur-
face-mount package.
Central Office
Telecom Equipment
Test and Measurement
Multi-Chip Modules
Industrial Controllers
Ordering Information
ORDER
NUMBER
G782P71U
TEMP.
RANGE
PACKAGE
(Green)
MARKING
G782
-55°C to +125°C
MSOP-10
Note:P7:MSOP-10
1: Bonding Code
U: Tape & Reel
Pin Configuration
Typical Application Circuit
3V TO 5.5V
0.1µF
G782
CPU
VCC
10kΩ EACH
1
2
3
4
5
10 SMBCLK
VCC
DXP1
DXN1
DXP2
DXN2
DXP1
9
8
7
6
SMBDATA
ALERT
THERM
GND
DXN1
CLOCK
DATA
SMBCLK
SMBDATA
DXP2
DXN2
ALERT
INTERRUPT TO µC
THERM
GND
MSOP-10
Ver: 1.4
Jun 29, 2010
TEL: 886-3-5788833
http://www.gmt.com.tw
1