Global Mixed-mode Technology Inc.
G692/G693
4-Pin µP Voltage Monitors with Manual Reset Input
Features
General Description
The G692/G693 are microprocessor (µP) supervisory
circuits used to monitor the power supplies in µP and
digital systems. They provide excellent circuit reliability
and low cost by eliminating external components and
adjustments when used with +5V, +3.3V, +3.0V- pow-
ered circuits. The G692/G693 also provide a de-
bounced manual reset input.
Precision Monitoring of +3V, +3.3V, and +5V
Power-Supply Voltages
Fully Specified Over Temperature
Available in Three Output Configurations
Push-Pull RESET Output (G692L)
Push-Pull RESET Output (G692H)
Open-Drain RESET Output (G693L)
140ms Min Power-On Reset Pulse Width
14µA Supply Current
Guaranteed Reset Valid to VCC = +1V
Power Supply Transient Immunity
No External Components
These circuits perform a single function: they assert a
reset signal whenever the VCC supply voltage declines
below a preset threshold, keeping it asserted for at
least 140ms after VCC has risen above the reset
threshold. Reset thresholds suitable for operation with
a variety of supply voltages are available.
Manual Reset Input
4-Pin SOT-143 and 5-Pin SC-70 Package
2% Threshold Accuracy
The G693L has an open-drain output stage, while the
G692 have push-pull outputs. The G693L's open-drain
RESET output requires a pull-up resistor that can be
connected to a voltage higher than VCC.
Applications
The G692L have an active-low RESET output, while
the G692H has an active-high RESET output. The re-
set comparator is designed to ignore fast transients on
VCC, and the outputs are guaranteed to be in the cor-
rect logic state for VCC down to 1V.
Computers
Controllers
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable / Battery-Powered Equipment
Automotive
Low supply current makes the G692/G693 ideal for use
in portable equipment. The G692/G693 are available in
a 4-pin SOT-143 and 5-Pin SC-70 packages.
Ordering Information
ORDER NUMBER
ORDER NUMBER
TEMP. RANGE
PACKAGE
(Pb free)
G692HxxxTCU
G692LxxxTCU
G692HxxxTCUf
G692LxxxTCUf
G693LxxxTCUf
G692HxxxTAUf
G692LxxxTAUf
G693LxxxTAUf
-40°C~+105°C
-40°C~+105°C
-40°C~+105°C
-40°C~+105°C
-40°C~+105°C
-40°C~+105°C
SOT-143
SOT-143
SOT-143
SC-70-5
SC-70-5
SC-70-5
G693LxxxTCU
G692HxxxTAU
G692LxxxTAU
G693LxxxTAU
xxx specifies the threshold
e.g. 263 denotes voltage the 2.64V threshold voltage.
Pin Configuration
Typical Application Circuit
G692/G693
G692/G693
VCC
4
3
1
5
4
VCC
MR
GND
GND
VCC
GND
VCC
1
2
RPULL-UP
*
2
3
µP
RESET
INPUT
G692/G693
RESET
MR
(RESET)
VCC
MR
RESET
RESET
GND
(RESET)
(RESET)
GND
SC-70-5
SOT-143
*G693 ONLY
()is for G692H
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.7
May 19, 2006
1