G682/G683
Global Mixed-mode Technology
Low Voltage Reset IC
Features
General Description
Monitor Supply Voltages from 0.9V to 1.8V
The G682/G683 microprocessor (µP) supervisory cir-
cuits monitor system voltages in µP and digital sys-
tems. They provide excellent circuit reliability at low
cost by eliminating external components.
±2% Reset Threshold Accuracy
Capacitor-Adjustable Reset Timeout Period
t
RP (ms) ≅ 2.7 × CD (nF) at VCC=3.3V
Low Quiescent Current : 10µA at VCC =3.3V
Available in three RESET Output Options
Since the sense pin is separated from power supply, it
allows the IC to monitor added power supply. Using
the IC with the sense pin separated from power supply
enables output to maintain the state of detection even
when voltage of the monitored power supply drops to
0V. The VSEN pin of G68_ _09T_ is high impedance
and can be used for application of reset threshold
programming.
Push-Pull RESET Output (G682L)
Push-Pull RESET Output (G682H)
Open-Drain RESET (G683L)
Programmable Reset Threshold Application
(G68_ _09T_)
Guaranteed Reset Valid to VCC = 1V
Power-Supply Transient Immunity
SOT-23-5, SC-70-5, DFN1.6X1.6-6 and
ADFN1.5X1.5-6 Packages
Moreover, with the built-in delay circuit, connecting the
delay capacitance pin to the capacitor enables the IC
to provide an arbitrary release delay time.
All of these devices are offered in SOT-23-5, SC-70-5,
DFN1.6X1.6-6 and ADNF1.5X1.5-6 packages.
Applications
Computers
Controllers
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable/Battery-Powered Equipment
Telecom/Networking Equipment
Pin Configuration
Typical Application Circuit
VCC
G682/G683 T12/TA2
G682/G683 T11/TA1
*100kΩ
RESET
(RESET)
RESET
(RESET)
1
1
2
3
5
4
CD
5
VCC
CD
Detect
Voltage
VSEN
RESET
(RESET)
GND
2
3
GND
VCC
CD
GND
VSEN
4
VSEN
SOT-23-5/SC-70-5
G682/G683
SOT-23-5/SC-70-5
VCC
G682/G683
Detect
Voltage
*
100kΩ
RESET
(RESET)
RESET
(RESET)
CD
NC
1
6
1
6
VCC
R1
RESET
(RESET)
Thermal
Pad
2
3
5
4
GND
VCC
2
3
5
4
GND
VSEN
CD
VSEN
**
CD
VSEN
R2
NC
GND
DFN1.6X1.6-6
Note: Recommend connecting the Thermal Pad
ADFN1.5X1.5-6
to the Ground for excellent power dissipation.
*
The 100kΩ pull up resistor is only for G683L
**Adjustable reset threshold voltage is only for G68__09T_.
()is for G682H
R1+R2
Vth = 0.788 ×
R2
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 0.8
Feb 27, 2013
1