Global Mixed-mode Technology Inc.
G670/G671
Microprocessor Reset IC
Features
General Description
Precision Monitoring of +3V, +3.3V, and +5V
The G670/G671 are microprocessor (µP) supervisory
circuits used to monitor the power supplies in µP and
digital systems. They provide excellent circuit reliability
and low cost by eliminating external components and
adjustments when used with +5V, +3.3V, +3.0V- pow-
ered circuits.
Power-Supply Voltages
Fully Specified Over Temperature
Available in Three Output Configurations
Push-Pull RESET Output (G670L)
Push-Pull RESET Output (G670H)
Open-Drain RESET Output (G671L)
2ms max Power-On Reset Pulse Width
14µA Supply Current
Guaranteed Reset Valid to VCC = +1V
Power Supply Transient Immunity
No External Components
These circuits perform a single function: they assert a
reset signal whenever the VCC supply voltage declines
below a preset threshold. Reset thresholds suitable for
operation with a variety of supply voltages are avail-
able.
The G671L has an open-drain output stage, while the
G670 have push-pull outputs. The G671L’s open-drain
3-Pin SOT-23,TO-92 and SOT-89 Packages
2% Threshold Accuracy
RESET output requires a pull-up resistor that can be
connected to a voltage higher than VCC. The G670L
have an active-low RESET output, while the G670H
has an active-high RESET output. The reset com-
parator is designed to ignore fast transients on VCC,
and the outputs are guaranteed to be in the correct
logic state for VCC down to 1V.
Applications
Computers
Controllers
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable / Battery-Powered Equipment
Automotive
Low supply current makes the G670/G671 ideal for
use in portable equipment. The G670/G671 are avail-
able in 3-pin SOT-23, TO-92 and SOT-89 packages.
Pin Configuration
Typical Application Circuit
VCC
3
VCC
VCC
*
RPULL-UP
Top
View
µP
RESET
INPUT
G670/G671
TTooppVVieieww
RESET
(RESET)
GND
GND
1
3
2
2
1
1
3
2
SOT-89
SOT-23
TO-92
*G671 only
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.5
Dec 03, 2005
1