5秒后页面跳转
G670_15 PDF预览

G670_15

更新时间: 2024-09-29 01:25:15
品牌 Logo 应用领域
致新 - GMT /
页数 文件大小 规格书
1页 37K
描述
Microprocessor Reset IC

G670_15 数据手册

  
G670/G671  
Global Mixed-mode Technology  
Microprocessor Reset IC  
Features  
General Description  
„
Precision Monitoring of +3V, +3.3V, and +5V  
The G670/G671 are microprocessor (µP) supervisory  
circuits used to monitor the power supplies in µP and  
digital systems. They provide excellent circuit reliability  
and low cost by eliminating external components and  
adjustments when used with +5V, +3.3V, +3.0V- pow-  
ered circuits.  
Power-Supply Voltages  
„
„
Fully Specified Over Temperature  
Available in Three Output Configurations  
Push-Pull RESET Output (G670L)  
Push-Pull RESET Output (G670H)  
Open-Drain RESET Output (G671L)  
2ms max Power-On Reset Pulse Width  
14µA Supply Current  
Guaranteed Reset Valid to VCC = +1V  
Power Supply Transient Immunity  
No External Components  
3-Pin SOT-23,TO-92, SC-70-3(SOT-323) and  
SOT-89 Packages  
2% Reset Threshold Accuracy with 5% Hys-  
teresis  
These circuits perform a single function: they assert a  
reset signal whenever the VCC supply voltage declines  
below a preset threshold. Reset thresholds suitable for  
operation with a variety of supply voltages are avail-  
able.  
„
„
„
„
„
„
The G671L has an open-drain output stage, while the  
G670 have push-pull outputs. The G671L’s open-drain  
RESET output requires a pull-up resistor that can be  
connected to a voltage higher than VCC. The G670L  
„
have an active-low RESET output, while the G670H  
has an active-high RESET output. The reset com-  
parator is designed to ignore fast transients on VCC,  
and the outputs are guaranteed to be in the correct  
logic state for VCC down to 1V.  
Applications  
„
„
„
„
„
„
Computers  
Controllers  
Intelligent Instruments  
Critical µP and µC Power Monitoring  
Portable / Battery-Powered Equipment  
Automotive  
Low supply current makes the G670/G671 ideal for  
use in portable equipment. The G670/G671 are avail-  
able in 3-pin SOT-23, TO-92, SC-70-3(SOT-323) and  
SOT-89 packages.  
Pin Configuration  
Typical Application Circuit  
VCC  
3
VCC  
VCC  
0.1µF  
*
RPULL-UP  
Top  
View  
µP  
RESET  
INPUT  
G670/G671  
TopView
RESET  
(RESET)  
GND  
GND  
1
3
2
2
1
1
3
2
SOT-23/  
SC-70-3 (SOT-323)  
SOT-89  
TO-92  
*G671 only  
ICC may increased at high TA, Therefore, can not connect  
Resistors to VCC to prevent Icc abnormal behavior at high TA.  
TEL: 886-3-5788833  
http://www.gmt.com.tw  
Ver: 2.1  
Apr 10, 2012  
1

与G670_15相关器件

型号 品牌 获取价格 描述 数据表
G670H263T25UF GMT

获取价格

Power Management Circuit
G670H293T25UF GMT

获取价格

Power Management Circuit
G670H330T25UF GMT

获取价格

Power Management Circuit
G670H400T72U GMT

获取价格

Power Management Circuit, Fixed, +3.96VV
G670L263T25U GMT

获取价格

Power Management Circuit
G670L263T25UF GMT

获取价格

Power Management Circuit
G670L263T71U GMT

获取价格

Power Management Circuit, Fixed, +2.64VV
G670L263T71UF GMT

获取价格

Power Management Circuit, Fixed, +2.64VV
G670L263T72U GMT

获取价格

Power Management Circuit, Fixed, +2.64VV
G670L263T72UF GMT

获取价格

Power Management Circuit, Fixed, +2.64VV