Global Mixed-mode Technology Inc.
G660/G661/G662
Microprocessor Reset IC
Features
General Description
The G660/G661/G662 provide circuits initialization and
timing supervision, primarily for DSP and proces-
Power-On Reset Generator With Fixed Delay
Time of 200ms
sor-based systems. During power-on, RESET
(RESET) is asserted when supply voltage VCC be-
comes higher than 1.1 V. Thereafter, the supply volt-
Manual Reset Input (G660/G661)
Available in three RESET Output Options
Push-Pull RESET Output (G660L/G662)
Push-Pull RESET Output (G660H/G662)
age supervisor monitors VCC and keeps RESET
(RESET) active as long as VCC remains below the
Open-Drain RESET Output (G661L)
Supply Voltage Supervision Range
2.5V, 3V, 3.3V, 5V
Watchdog Timer (G660/G661/G662)
Supply Current of 10µA at VCC=3.3V
SOT-23-5 Package
(1)
threshold voltage VIT+
.
An internal timer delays the return of the output to the
inactive state to ensure proper system reset. The de-
lay time, td, starts after VCC has risen above the
threshold voltage VIT+. When the supply voltage drops
below the threshold voltage VIT-(2), the outputs be-
comes active again. No external components are re-
quired. All the devices have a fixed-sense threshold
voltage VIT- set by an internal voltage divider.
Temperature Range . . . −40°C to 85°C
Applications
Critical μP and μC Power Monitoring
Industrial Equipment
The G660/G661 incorporate a manual reset input,MR .
A low level at MR causes RESET (RESET) to be-
come active. The G660/G661/G662 have WDI pin.
The watchdog timer is periodically triggered by a posi-
tive or negative transition at WDI. When the supervis-
ing system fails to retrigger the watchdog circuit within
Programmable Controls
Automotive Systems
Portable/Battery-Powered Equipment
Intelligent Instruments
Wireless Communications Systems
Notebook/Desktop Computers
the time-out interval, ttout, RESET (RESET) becomes
active for the time period td. This event also reinitial-
izes the watchdog timer. Leaving WDI unconnected
disables the watchdog.
The product spectrum is designed for supply voltages
of 2.5V, 3V, 3.3V, and 5V. The circuits are available in
a SOT-23-5 package.
Note:
(1) VIT+ means the reset voltage of VCC from low to high
(2) VIT- means the reset voltage of VCC from high to low.
Pin Configuration
Typical Application Circuit
3.3V
100nF
G660/G661
G662
VCC
VCC
RESET
1
2
3
VCC
WDI
1
2
3
5
4
VCC
WDI
5
4
RESET
GND
RESET
(RESET)
RESET
G660/G661
G662
µP
GND
MR
*
WDI
I/O
MR
**
RESET
RESET
GND
RESET
GND
SOT-23-5
()is for G660H
SOT-23-5
*
MR is for G660/G661
** RESET is for G662
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 0.5
Jan 30, 2008
1