Global Mixed-mode Technology Inc.
G5920
Three Channel, Ultra Low-Dropout, Constant-Current
White LED Bias
Features
General Description
Ultra Low 150mV Dropout at 20mA
The G5920 is a high performance ultra low- dropout
constant current bias supply for white LEDs. It can be
used as an alternative to the simple ballast resistors in
conventional parallel white LEDs applications. Each
white LED bias current is matching to 0.6%.
0.6% High Accuracy Current Matching
20mA Full Scale Current
32 Level Linear Current Brightness Control
PWM Brightness Control
2.5V to 5.5V Supply Voltage Range
SOT-23-6 and TSOT-23-6 Package
For dimming control, an enable input pin is controlled
by processor GPIO output pulses for 32 level linear
current. Using a low frequency PWM waveform to this
enable input pin also controls the average LED current
which is proportional to the PWM duty.
Applications
Mobile Phones
White LED backlighting
The G5920 is suitable for single cell Li-ion battery
power device that using low forward voltage white
LEDs. The white LEDs can be powered directly from
battery without extra external components. This takes
an advantage of highest efficiency and creates no EMI
problem.
Ordering Information
ORDER
NUMBER
G5920TB1U
---
ORDER NUMBER
MARKING
TEMP. RANGE
PACKAGE
(Pb free)
G5920TB1Uf
G5920TP1U
5920x
5920x
-40°C to 85°C
-40°C to 85°C
SOT-23-6
TSOT-23-6
Note:TB : SOT23-6
1: Bonding Code
U: Tape & Reel
TP : TSOT23-6
Pin Configuration
Typical Application Circuit
G5920
Linear Current Dimming
LED1
EN
LED2
LED3
VCC
0.1µF
GND
VBAT
G5920
1
2
LED2
GND
6
5
LED1
VCC
G5920
PWM Dimming
EN
LED3
3
4
LED1
LED2
EN
SOT-23-6/TSOT-23-6
LED3
VCC
GND
VBAT
0.1µF
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Apr 02, 2007
1