G5565
Global Mixed-mode Technology
Quad-Output TFT LCD Bias Power
General Description
Features
The G5565 DC-DC converter provides regulated volt-
ages required by thin-film transistor (TFT) liquid crystal
displays (LCD) panels in TQFN5X5-28 package. One
step-up converter, one step-down converter, and two
charge pumps regulators converter the 8V to 14V input
voltage into four output voltages. These features com-
plete the power- supply requirements of large screen
LCD panels. The step-up converter provides source
voltages VAVDD and the step-down converter provides
logic voltage VLOGIC for the system. The dual charge
pumps regulators independently generate adjustable
regulated output voltages VGL and VGH to bias the
LCD using external charge pump attached to the
switching node. . The step-up converter operates with a
adjustable switching frequency from 500kHz to 2MHz.
And step-down converter operates with a fixed switching
frequency of 750kHz.
Input Supply Range: 9.5V ~ 14V
Current mode Boost converter for AVDD
¾ Adjustable switching frequency
¾ Integrated 20V/4A ,0.1Ω switching N-MOSFET
¾ 1.5% accurate with 3.5-A switching current
Buck Converter for VLOGIC
¾ Fixed 750kHz switching frequency
¾ Integrated 12-V/0.2-C Switching N-MOSFET
¾ 1.5% accurate with 1.5-A switching current
Charge-pump regulator for VGON & VGOFF
Built-in power-on sequence and soft-start
function
GD Signal to drive external P-MOSFET
Protection Function
¾ Input Under Voltage Lockout (UVLO)
¾ Thermal overload Protection (TOP)
¾ Over-Voltage Protection for (OVP)
¾ Over-Current Protection (OCP)
¾ Output Under Voltage Protection (UVP)
¾ Short Circuit Protection (SCP)
Both step-up and step-down converters operate in
asynchronous switch mode. Current mode control pro-
vides fast transient response and eases loop stabiliza-
tion. Fault protection includes cycle-by-cycle current
limit, thermal shutdown and short-circuit protection,
and over voltage protection of the step-up converter.
Available in TQFN-5X5-28 Package
Applications
The G5565 is available in a 28-pin TQFN (5mm x 5mm)
package.
TFT LCD Displays
Ordering Information
ORDER
NUMBER
G5565R61U
TEMP.
RANGE
PACKAGE
(Green)
MARKING
5565
-40°C ~ +85°C
TQFN5X5-28
Note: R6: TQFN5X5-28
1: Bonding Code
U: Tape & Reel
Pin Configuration
FBP
21
20
19
18
17
16
15
OS
AGND
FB
1
2
3
4
5
6
7
FSW
DLY1
COMPB
FBB
Thermal
Pad
GD
COMP
SS
VIN
VIN
REF
G5565 TQFN5X5-28
Note: Recommend connecting the Thermal Pad to the Ground for excellent power dissipation.
Ver: 0.1
Aug 06, 2012
TEL: 886-3-5788833
http://www.gmt.com.tw
1