G524A/B/C/D
Global Mixed-mode Technology
Power Distribution Switch
Features
General Description
The G524 is an integrated power switch for
self-powered and bus-powered Universal Serial Bus
(USB) applications. G524A, G524B, G524C, G524D
70mΩ High-Side MOSFET
(G524A,G524B,G524C,G524D)
Available with 4 Versions of Current Limits with
Foldback
are 70mΩ RDS(ON)
.
Operating Range:2.7V to 5.5V
1mS Typical Rise Time
Fast Overcurrent Response -1.5µs (TYPICAL)
Under voltage Lockout
130µA Quiescent Supply Current
1µA Maximum Shutdown Supply Current
Logic Level Enable Pin, Available with
Active-High or Active-Low Version
No Reverse Current when Power Off
Deglitched Open-Drain Over-Current Flag
Several Protection features include current limiting and
thermal shutdown to prevent catastrophic switch fail-
ure caused by increasing power dissipation when con-
tinuous heavy loads or short circuit occurs. A built-in
charge pump is used to drive the N-channel MOSFET
that is free of parasitic body diode to eliminate any
reversed current flow across the switch when it is pow-
ered off. When the output voltage is higher than input
voltage, the power switch is turned off by internal out-
put reverse-voltage comparator.
Output ( OC )
Available with or without Output Shutdown
Pull-low Resister
OC is an open-drain output report over-current or
over-temperature event and has typical 9ms deglitch
Output Reverse-Voltage Protection
SOT-23-5, TSOT-23-6, MSOP-8 and MSOP-8 (FD)
Packages
UL Certification_#E232223
CB Test Certification by IEC 60950-1:2005 (2nd
Edition); Am 1:2009
timeout period. In addition, OC also reports output
reverse-voltage condition with typical 5ms deglitch
timeout period.
Applications
High-Side Power Protection Switch
USB Power Management
USB Host and Self-Powered Bubs
USB Bus-Powered Hubs
Hot Plug-In Power Supplies
Battery-Charger Circuits
Pin Configuration
Typical Application Circuit
G524
G524
OUT
1
EN (EN)
GND
5
1
2
3
6
5
IN
OC
OUT
GND
OC
2
3
G524
Power Supply
2.7V to 5.5V
EN (EN)
OUT
4
4
IN
IN
OUT
Load
*
1µF
22µF
0.1µF
TSOT-23-6
G524
SOT-23-5
G524
OC
EN(EN)
ON
OFF
OUT
OUT
OUT
OC
8
7
6
5
OUT
OUT
1
2
3
4
8
GND
1
GND
IN
IN
IN
2
3
4
7
6
5
Thermal
Pad
OUT*
*
IN
*: 1µF of input capacitor is enough in most application cases.
If the PCB trace of power rail to IN is long, larger input capacitor is necessary.
EN (EN)
EN (EN)
OC
MSOP-8 (FD)
MSOP-8
Note: Recommend connecting the Thermal Pad to
the GND for excellent power dissipation.
*
Pin#6 should be considered as OUT when circuit design and PCB layout, but it is NC pin actually.
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 0.6
Jun 13, 2013
1