G3402
Global Mixed-mode Technology
4-Bit Bidirectional Voltage Level Translator for
Open Drain and Push-Pull Applications
Features
General Description
4-Bit Bidirectional Translator for Open Drain
The G3402 is a qual bidirectional I2C and SMBUS
voltage-level translator with an output enable (OE)
input, and is operational from 1.2V to 3.3V VCCA and
2.5V to 5.5V VCCB. It allows bidirectional voltage trans-
lations between 1.2V and 5V, without use of direc-
tional pin. The low ON-state resistance (rON) of the
switch ensures the connections to be with minimal
propagation delay. When OE is high, the translator
switch is ON, and the AN I/O are connected to the BN
I/O, respectively, allowing bidirectional data flow be-
tween ports. When OE is low, the translator switch is
off, and a high-impedance exists between ports.
and Push-Pull Bus Applications
I2C and SMBus Compatible
Less than 1.5ns Maximum Propagation Delay to
Accommodate Standard-Mode and Fast-Model
I2C Devices and Multiple Masters
Allows Voltage-Level Translator Between
1.8V VCCA and 2.5V, 3.3V, 5V VCCB
2.5V VCCA and 3.3V, 5V VCCB
3.3V VCCA and 5V VCCB
VCCA ≦ VCCB
Provides Bidirectional Voltage Translation
without Direction Pin
Max Data Rates
Pull-up resistors are included on input and output lines
internally to provide the logic high levels on the trans-
lator’s bus. The size of the pull-up resistors are 10kΩ,
and is allowed to use lower pull-up resistor value to
minimal 1kΩ by adding external resistor.
24Mbps for Push Pull
Over 1.3Mbps for Open Drain
Low 3.5Ω ON-State Connection Between Input
and Output Ports Provides Less Signal Distortion
Open-Drain I2C I/O Ports
All channels have the same electrical characteristics,
and there is minimal deviation from one output to an-
other in voltage or propagation delay. This is a benefit
over discrete translation solutions, since the fabrica-
tion of the switch is symmetrical.
5V Tolerant I2C I/O Ports to Support Mixed
Mode Signal Operation
High Impedance AN and BN Pins for OE=Low
Lock-up-Free Operation for Isolation When
OE=Low
IEC 61000-4-2 Level 4 (±8kV Contact Discharge
and ±15kV Air-gap Discharge) ESD Protection for
pins B1, B2, B3, B4, OE and VCCB. 2kV HBM
IEC61340-3-1 Protection for All Other Pins.
Ordering Information
ORDER
NUMBER
G3402B51U
G3402B51D
TEMP.
RANGE
PACKAGE
(Green)
MARKING
3402
3402
-40°C to 85°C
-40°C to 85°C
WLCSP3X4-12
WLCSP3X4-12
Note: B5: WLCSP3X4-12
1: Bonding Code
U & D: Tape & Reel
Pin Configuration
12 Bump WLCSP
3
2
1
A1
VCCB
B1
A
B
A2
A3
VCCA
OE
B2
B3
C
D
A4
GND
B4
Bottom View
WLCSP3X4-12
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 0.5
Aug 20, 2012
1