Special Encoders & Sensors
Incremental encoder, surface mount housing
Resolution 1...120 pulses
G 305
Features
– Low-cost encoder
– Optical sensing
– Up to 120 pulses with 1 or 2 pulse tracks
– Surface mount housing (for measuring wheel)
– Shaft at one or both ends
– Versatile mounting options
G 305 with single shaft
Technical data - electrical ratings
Technical data - mechanical design
Voltage supply
10...30 VDC
≤40 mA
5...120
Housing
Shaft
62.5 x 70 mm
Consumption w/o load
Resolution (steps/turn)
Sensing method
ø7 mm single / dual shaft
Protection DIN EN 60529 IP 30 with housing connector
IP 52 with PG cable
Optical
Operating speed
≤6000 rpm
Output frequency
≤10 kHz (1 track)
≤6 kHz (2 tracks)
Admitted shaft load
≤5 N axial
≤10 N radial
Output signals
Output circuit
A or A 90° B
Material
Housing: plastic,
glass-fibre reinforced
Push-pull short-circuit proof
Operating temperature
Relative humidity
Weight approx.
0...+60 °C
95 % non-condensing
130 g
E-connection
Connector or cable
Output signals
Clockwise rotating direction when looking at flange.
For 1 track
Track A
For 2 tracks
Track A
90°
Track B
www.baumerivo.com
1