Opti-Core ™ Fibre Optic Patch Cords –
Low Smoke Zero Halogen (LSZH) Rated
S P E C I F I C A T I O N S H E E T
s p e c i f i c a t i o n s
RoHS compliant fibre optic patch cords shall include simplex or
duplex LC, SC, ST or MT-RJ connectors, or FJ or keyed FJ plugs or
jacks on both ends. RoHS compliant fibre optic pigtails shall include
simplex or duplex LC, SC, ST, or MT-RJ connectors, or FJ or keyed
FJ plugs or jacks on one end and open (unterminated) on the other
end. Patch cords and pigtails shall include laser optimised OM4, OM3
fibre or OM2, OM1 or OS1/OS2 fiber in 900µm tight-buffered fibre,
1.6mm or 3.0mm simplex or duplex zipcord jacketed cable, or 1.8mm
duplex zipcord jacketed cable. Jacketed cable shall be compliant with
IEC-60332-3 (LSZH) flame ratings. Patch cords and pigtails shall meet
or exceed requirements of TIA/EIA-568-C.3. The fibre connectors shall
be FOCIS compliant or compatible, and exceed the requirements of
TIA/EIA-455-21A for 500 mating cycles.
™
Opti-Core Low Smoke Zero
Halogen (LSZH) Fibre Optic
Patch Cords
Duplex LC to LC
1.6mm
jacketed cable:
Duplex SC to SC
3mm
jacketed cable:
Duplex ST to ST
3mm
jacketed cable:
Duplex MT-RJ to
MT-RJ 1.8mm
jacketed cable:
™
Opti-Core Low Smoke Zero
Halogen (LSZH) Hybrid
Fibre Optic Patch Cords
F^LE10-10M‡
F^LD3-3M‡
F^LD2-2M‡
F^LZ12-12M‡
t e c h n i c a l i n f o r m a t i o n
Standards
requirements:
All connectors exceed TIA/EIA-455-21A: 500 mating cycles
Compliant with:
TIA/EIA-568-C.3 and ISO/IEC 11801
IEC-61754-7 (International)
TIA-604-5 (FOCIS-5)
IEC-60332-3 (LSZH) flame rating
Insertion
loss:
Per connection:
0.10dB typical (multimode), 0.25db max. (OM1, OM2
and Standard OM3, OM4)
0.15db max. (optimized OM3 and Optimized OM4) for SC and LC
0.30db max. for other connectivity
Duplex SC to LC
1.6mm
jacketed cable:
Duplex ST to LC
1.6mm
jacketed cable:
Duplex ST to SC
3mm
jacketed cable:
Duplex SC to
MT-RJ 1.8mm
jacketed cable:
0.50dB max. (MT-RJ multimode);
0.25dB typical singlemode, 0.35dB max., (SM-UPC) for LC,
0.50dB max. (SM-UPC) for other connectivity
F^LE3-10M‡
F^LE2-10M‡
F^LD2-3M‡
F^LZ3-12M‡
F^LZ2-12M‡
F^LZ6P-12M‡
Return loss:
20dB min. (multimode); 26dB min. (10Gig ™ multimode);
55dB min. (singlemode)
k e y f e a t u r e s a n d b e n e f i t s
Factory terminated and 100%
tested for insertion loss (all)
Assures high performance for increased up-time and lower
cost of ownership
™
and return loss (10Gig and SM)
Duplex ST to
MT-RJ 1.8mm
jacketed cable:
Low smoke zero halogen
rated jacket
Meets IEC-60332-3 (LSZH) flame rating for standard
compliant safety
™
Singlemode endface
geometry 100%
factory inspected
Every singlemode endface is inspected in compliance with
Telcordia GR-326-CORE, Issue 3 requirements to assure
high performance
Duplex FJ Plug
to MT-RJ 1.8mm
jacketed cable:
Singlemode endface
UPC polished
(55dB min. return loss)
Ensure a high quality endface for higher return loss to meet
application requirements
Substitute for fibre type:
Z = OM4 – 10Gig™ 50/125µm
ZO = Optimized OM4 – 10Gig™ 50/125µm
X = OM3 – 10Gig™ 50/125µm
XO = Optimized OM3 – 10Gig™ 50/125µm
5 = OM2 – 50/125µm,
Singlemode patch cords
include low water peak fibre
Eliminates high attenuation in the E-band and allows
operation over the entire 1260nm – 1625nm wavelength
range; excellent for CWDM and DWDM applications
6 = OM1 – 62.5/125µm, or
9 = OS1 – 9/125µm
Certified 10 GbE performance
10Gig ™ Patch Cords and Pigtails are tested per IEEE 802.3ae 10
GbE to support network transmission speeds up to 10 Gb/s for link
lengths up to 300m for OM3 and up to 550 meters for OM4 at
850nm to assure high performance and reliability
‡Substitute for length in metres:
Patch cords 1m – 10m, 15m, 20m, 25m
or 30m; pigtails – 1, 2, or 3.
Contact Customer Service for other
available lengths.
Test data supplied with each
patch cord
Establishes a performance reference to streamline
maintenance and troubleshooting
Q.C. identification label
Quality control reference provides lifetime traceability of test data
a p p l i c a t i o n s
Opti-Core ™ Fibre Optic Patch Cords provide
interconnect and cross-connect of applications
over installations in entrance facilities,
and Pigtails are available in OM4, OM3 fibre or
OM2, OM1 or OS1/OS2 fibre types to meet the
demands of Gigabit Ethernet, 10 Gigabit Ethernet
and high speed Fibre Channel systems while
maintaining compatibility with Ethernet, Fast
Ethernet, FDDI and ATM. If application requires
riser (OFNR) or Plenum (OFNP) rated fibre optic
patch cords or pigtails, refer to Opti-Core™ Fibre
Optic Patch Cords or Pigtails – Riser (OFNR) and
Plenum (OFNP) Rated specification sheet.
telecommunications rooms, data centres and at
the desk. They support network applications to
interconnect pre-terminated cassettes in main
distribution, horizontal distribution, and equipment
distribution areas. These low smoke zero halogen
(LSZH) rated patch cords support installations
that require these flame ratings in specific
environments. Opti-Core™ Fibre Optic Patch Cords
www.panduit.com
5秒后页面跳转
塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
英特尔震撼发布：128核心256线程的至强6性能核处理器
SK海力士量产12层HBM3E，容量高达36GB
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
