APPLICABLE STANDARD
OPERATING
STORAGE
-10 C TO 60 C
40 % TO 80 %
-55 C TO 85 C
100 V AC
0.4 A
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
RATING
VOLTAGE
CURRENT
STORAGE HUMIDITY
RANGE
40 % TO 70 %
SPECIFICATIONS
ITEM
CONSTRUCTION
TEST METHOD
REQUIREMENTS
QT AT
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
×
×
×
×
MARKING CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
80 mΩ MAX . (1)
100 mΩ MAX . (2)
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL
METHOD
100 mA (DC OR 1000 Hz).
×
×
20 mV MAX,
1
mA(DC OR 1000Hz)
INSULATION
RESISTANCE
VOLTAGE PROOF
250 V DC
100 MΩ MIN.
×
×
300 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
INSERTION AND
WITHDRAWAL FORCE
MECHANICAL
MEASURED BY APPLICABLE CONNECTOR.
INSERTION FORCE :
WITHDRAWAL FORCE :
① CONTACT RESISTANCE:100 m MAX. (2)
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
56.0 N MAX.
5.2 N MIN.
×
×
50 TIMES INSERTIONS AND EXTRACTIONS.
OPERATION
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz,
AMPLITUDE : 1.5 mm,
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② CONTACT RESISTANCE:100 m MAX. (2)
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
2 hrs IN
490 m/s2 , DURATION OF PULSE 11 ms
FOR TIMES IN DIRECTIONS.
3
DIRECTIONS.
3
3
ENVIRONMENTAL CHARACTERISTICS
① CONTACT RESISTANCE:100 m MAX. (2)
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DAMP HEAT
EXPOSED AT 40±2 C, 90 ~ 95 %, 96 hrs.
×
×
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-55→+15~+35→ +85→+15~+35C
TIME
5
30 → 2~3 → 30 → 2~3 min
CYCLES.
① CONTACT RESISTANCE:100 m MAX. (2)
② NO DEFECT SUCH AS CORROSION
WHICH IMPAIRS THE FUNCTION OF
CONNECTOR.
CORROSION SALT MIST EXPOSED IN
48 hrs.
HYDROGEN SULPHIDE EXPOSED IN
5
% SALT WATER SPRAY FOR
×
×
3
PPM FOR 96 hrs.
(TEST STANDARD: JEIDA 38)
RESISTANCE TO
SOLDERING HEAT
1) REFLOW SOLDERING : 250 C MAX,
NO DEFORMATION OF CASE OF
EXCESSIVE LOOSENESS OF THE
TERMINALS.
×
: 220 C MIN,
FOR 60
s
s
2) SOLDERING IRONS
: 360 C,
×
×
FOR
5
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
240C,
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
FOR IMMERSION DURATION,
3 sec.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(1) THIS CONNECTOR’S INITIAL CONTACT RESISTANCE SHALL BE 80 mΩ,
BECAUSE OF THE BULK RESISTANCE OF STACKING HEIGHT 16 mm TYPE.
(2) AFTER TEST, THE CHANGE OF THE CONTACT RESISTANCE
SHALL BE 20 mΩ MAX.
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NH.NAKATA
18.02.28
18.02.28
18.02.28
18.02.23
HT.YAMAGUCHI
TY.EDAGAWA
MK.INOUE
Unless otherwise specified, refer to JIS C 5402.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-150882-68-00
FX8C-80S-SV(68)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL578-0803-8-68
FORM HD0011-2-1