APPLICABLE STANDARD
OPERATING
STORAGE
-10 C TO 60 C (3)
40 % TO 80 %
-55 C TO 85 C
100 V AC
0.4 A
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
RATING VOLTAGE
CURRENT
STORAGE HUMIDITY
RANGE
40 % TO 70 % (3)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
80 m MAX .(1)
CONTACT RESISTANCE
100 mA (DC OR 1000 Hz).
×
×
100 mΩ MAX .(2)
CONTACT RESISTANCE 20 mV MAX,
MILLIVOLT LEVEL
1
mA(DC OR 1000Hz)
METHOD
INSULATION
250 V DC.
100 M MIN.
×
×
RESISTANCE
VOLTAGE PROOF
300 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MEASURED BY APPLICABLE CONNECTOR.
INSERTION FORCE:
WITHDRAWAL FORCE:
① CONTACT RESISTANCE: 100 m MAX.(2)
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
42
N MAX.
INSERTION AND
×
×
3.9 N MIN.
WITHDRAWAL FORCE
MECHANICAL
OPERATION
50 TIMES INSERTIONS AND EXTRACTIONS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz,
AMPLITUDE : 1.5 mm,
AT 2 h FOR 3 DIRECTION.
① NO ELECTRICAL DISCONTINUITY OF
1 s.
×
×
② CONTACT RESISTANCE: 100 m MAX.(2)
490 m/s2 , DURATION OF PULSE 11 ms
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
AT
3
TIMES FOR
3
DIRECTIONS.
40±2 C, 90 ~ 95 %, 96 h.
TEMPERATURE-55→+15~+35→+85→+15~+35C
ENVIRONMENTAL CHARACTERISTICS
① CONTACT RESISTANCE: 100 m MAX.(2)
② INSULATION RESISTANCE: 100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DAMP HEAT
EXPOSED AT
×
×
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
TIME
UNDER
30 → 2~3 → 30 →
CYCLES.
% SALT WATER SPRAY FOR
2~3 min
5
① CONTACT RESISTANCE: 100 m MAX.(2)
② NO DEFECT SUCH AS CORROSION
WHICH IMPAIRS THE FUNCTION OF
CONNECTOR.
CORROSION SALT MIST EXPOSED IN
48 h.
5
×
×
×
HYDROGEN SULPHIDE EXPOSED IN
3 PPM FOR
96 h.
(TEST STANDARD: JEIDA-38)
RESISTANCE TO
SOLDERING HEAT
1) REFLOW SOLDERING : 250 C MAX,
: 220 C MIN,
NO DEFORMATION OF CASE OF
EXCESSIVE LOOSENESS OF THE
TERMINALS.
FOR 60
s
2) SOLDERING IRONS
: 360 C,
FOR
5
s
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
×
240 ± 3C,
FOR IMMERSION DURATION,
3
s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NH.NAKATA
18.02.28
18.02.28
18.02.28
18.02.22
(1)THIS CONNECTOR’S INITIAL CONTACT RESISTANCE SHALL BE 80 mΩ,BECAUSE OF THE
BULK RESISTANCE OF STACKING HEIGHT 16 mm TYPE.
HT.YAMAGUCHI
TY.EDAGAWA
MK.INOUE
(2)AFTER TEST, THE CHANCE OF THE CONTACT RESISTANCE SHALL BE 20 mΩ MAX.
(3)THIS STORAGE INDICATES A LONG-TERM STORAGE STATE FOR THE UNUSED PRODUCT
BEFORE THE BOARD MOUNTED.
Unless otherwise specified, refer to JIS C 5402.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-150881-68-00
FX8C-60S-SV(68)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
1/1
0
CL578-0801-2-68
△
FORM HD0011-2-1