Stacking Height 5 to 11mm Half Pitch Connector
FX4 Series
Stacking Height Flexible
5 to 11mm
6 to 11mm
SMT type
DIP type
The mounting area 70% reduced, compared with
conventional product (FX2 series)
FX2 series
FX4 series
(Compared with 60 contacts)
ꢀFeatures
The FX4 series is a miniature board to board connectors, where the stacking height can be set at the 1mm interval.
According to the mounting method, you can select the product from the through hole type and SMT type.
ꢀThrough hole Type
ꢀSMT Type
1. Small and Light
1. Small and Light
The mounting space and weight is reduced about 30%,
compared to the conventional product (HRS FX2 series),
respectively, and the mounting area about 70% reduced,
compared to the conventional one.
The mounting space and weight is reduced about 40%,
compared with the conventional product (HRS FX2 series),
and the mounting area is reduced 80%, compared to the
conventional one.
2. Stacking Height 5 to 11mm
2. Stacking Height 6 to 11mm
The board to board stacking height can be set per 1mm
from 5mm up to 11mm.
The board to board stacking height can be set per 1mm
from 6mm up to 11mm. In addition, the height can be also
set in combination with the through hole type.
3. Flux Swell Prevention
3. Mis-insertion Prevention and Low
Insertion/Extraction Structure
When solder is dipped, the flux swell from the board rear
side is completely prevented.
The connection area is designed to completely prevent the
mis-insertion.
4. Mis-insertion Prevention and Low
Insertion/Extraction Force Mechanism
Moreover, the low insertion/extraction force mechanism is
adopted.
The connection area is designed to completely prevent the
mis-insertion.
4. Positioning Boss Selectable
Moreover, the low insertion/extraction mechanism is
adopted.
According to the mounting condition, it is selected whether
or not the boss is required. Regarding the boss attached
type, the boss eccentric position can stabilize the mounting
direction.
ꢀApplications
Computers, peripheral equipments, business equipments, etc.
A189