(3)
Applicable standard
Voltage
UL : UL1977, C-UL : CSA22.2 No.182.3-M1987, TÜV : EN61984:2009
Operating
2
-55 C to 105 C (1)
250 V AC/DC(UL/C-UL)
Temperature Range
3
2
150V AC/DC(TÜV)
Operating
Relative Humidity 85% max
(Not dewed)
Humidity Range
Storage
Temperature Range
RATING
20 A (AMBIENT TEPM 25℃)
13 A (UL/C-UL)
-10 C to 60 C (2)
3
2
Current
40 % to 70 % (2)
Storage Humidity Range
According to drawing.
15 A (TÜV)
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Marking
Visually and by measuring instrument.
Confirmed visually.
×
×
×
×
ELECTRIC CHARACTERISTICS
Contact Resistance
Insulation Resistance
Voltage Proof
10 mA(DC or 1000Hz)
2 mΩMAX.
×
×
×
-
-
-
250 V DC.
1000 MΩMIN.
4
4
750 V AC for 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Insertion and
Withdrawal Forces
Mechanical Operation
Measured by applicable connector.
Insertion Force:
Withdrawal Force:
20 N MAX.
0.8 N MIN.
×
×
-
-
100 times insertions and extractions.
① Contact Resistance: 5 mΩMAX.
② No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 55 to 10Hz, approx 5min
Single amplitude : 0.75 mm, 10 cycles
for 3 axial directions.
① No electrical discontinuity of 1 s.
② No damage, crack and looseness of parts.
×
×
-
-
490 m/s2 , duration of pulse 11 ms,
3 times to both directions in 3 axial directions.
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
(Steady State)
Exposed at 40±2 C, 90 ~ 95 %, 96 ±4h.
① Contact Resistance: 5mΩ MAX.
×
×
-
-
② Insulation Resistance: 1000 M MIN.
③ No damage, crack and looseness of parts.
Rapid Change of
Temperature
Temperature -55
→
+105 C
30 min.
Time
30
→
under 5 cycles.
(Relocation time to chamber: within 2~3 MIN)
Dry heat
Cold
Exposed at +105±2℃ for 96±4h.
×
×
-
-
Exposed at -55±2℃ for 96±4h.
Sulfur Dioxide
Exposed at 25±2℃, 75±5%RH,
25 PPM for 96h±4h.
① Contact Resistance: 5mΩ MAX.
② No defect such as corrosion which impairs
the function of connector.
No deformation of case of excessive looseness
of the terminal.
×
×
-
-
Resistance to
Soldering Heat
Solder bath : Solder temperature 260±5℃
for immersion, duration 10±1sec.
Soldering irons : 380℃ MAX. for 10 sec.
1
A new uniform coating of solder shall cover a
minimum of 95 % of the surface being immersed.
Solderability
Soldered at solder temperature 240±3℃
for immersion, duration 3 sec.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
TS.OONO
CHECKED
HT.YAMAGUCHI
HS.OKAWA
DATE
4
△
2
DIS-F-00002346
(1) Include temperature rise caused by current-carrying.
(2) “Storage” means a long-term storage state
17.05.12
13.03.07
13.03.07
13.03.07
13.03.07
REMARKS
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
DK.AIMOTO
for the unused product before assembly to PCB.
(3) Pollution degree:2 type of terminals :dip solder contacts.
Unless otherwise specified, refer to JIS-C-5402,IEC60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DK.AIMOTO
DRAWING NO.
ELC4-347274-00
FX30B-4S-3.81DSA
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
4
△
1/2
CL570-3502-7-00
FORM HD0011-2-1