APPLICABLE STANDARD
Storage
Temperature Range
Operating
(2)
(1)
-10 C to 60 C
-40 C to 140 C
125 V AC (3)
0.5 A
Temperature Range
Relative humidity 60% max
(Not dewed)
Storage Humidity Range
Operating Humidity Range
Voltage
Rating
Relative humidity 85% max
(Not dewed)
Current
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Marking
Examined visually and with a measuring instrument.
Confirmed visually.
×
×
×
×
According to the drawing.
ELECTRICAL CHARACTERISTICS
Contact Resistance
Insulation Resistance
Measured at 100 mA MAX.(DC or 1000Hz)
65mΩ MAX.
×
×
×
-
-
-
Measured at 250 V DC.
1000 MΩMIN.
No flashover or breakdown.
Voltage Proof
375 V AC applied for 1 min.
MECHANICAL CHARACTERISTICS
Mating and
Measured with an applicable connector.
Mating Force:
60 N MAX.
×
×
×
-
-
-
Unmating Forces
Mechanical Operation
Unmating Force: 6.6 N MIN.
①Contact Resistance : 75mΩ MAX.
②No damage, cracks or looseness of parts.
Mated and unmated 10 times.
Vibration
Frequency 50~100 → 100~150 → 150~300Hz ①No electrical discontinuity of more than 1 s.
Acceleration 98
1 cycle 3 min
→ 98~294 → 294 m/s2
②No damage, cracks or looseness of parts.
3 h for 3 axial directions (4)
Shock
Acceleration 980 m/s2 , duration of pulse 6 ms
at 3 times for 3 axial directions.
×
-
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
(Steady state)
Exposed at 60±2 C, 90 ~ 95 %, 1000 h.
①Contact Resistance : 75mΩ MAX.
②Insulation Resistance : 1000 M MIN.
③No damage, cracks or looseness of parts.
×
×
-
-
2
△
Rapid Change of
Temperature
Temperature
Time
-40
30
→
→
+140 C
30 min.
under 1000 cycles.
(Relocation time to chamber : within 2~3 MIN)
Cold
Dry Heat
Sulfur Dioxide
Exposed at -40℃, 1000 h
Exposed at 140℃, 1000 h
Exposed at 40±2℃, 80±5%RH,
25±5 PPM for 96 h.
①Contact Resistance : 75mΩ MAX.
②No damage, cracks or looseness of parts.
Contact Resistance : 75mΩ MAX.
×
×
×
-
-
-
Resistance to
Soldering Heat
1)Reflow soldering :
Peak TMP : 260℃MAX
No deformation of case of excessive looseness
of the terminal.
×
-
Reflow TMP: 220℃MIN for 60sec.
1
△
Solderability
Soldered at solder temperature
A new uniform coating of solder shall cover a
minimum of 95 % of the surface being
immersed.
×
-
240±3℃ for immersion duration, 3 sec.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
TK.ABE
CHECKED
DATE
2
1
DIS-F-00016361
(1) Include temperature rise caused by current-carrying.
HH.SHINDO
20221215
20190719
20190718
20190718
△
Notes
APPROVED
CHECKED
DESIGNED
HH.SHINDO
(2) “STORAGE” means a long-term storage state for the unused product
before assembly to PCB.
KN.SHIBUYA
TK.ABE
(3)The creepage distance conforms to IEC 60664-1.
Voltage effective value: 32V AC, Pollution Degree: 2
(4)Amplitude between connector mounting part and PCB is 0.05mm MAX.
DRAWN
TK.ABE
20190718
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
ELC-376652-00-00
FX26-60S-1SV20
SPECIFICATION SHEET
2
1/1
HIROSE ELECTRIC CO., LTD.
CODE NO.
CL0576-1306-0-00 △
FORM HD0011-2-1