APPLICABLE STANDARD
Operating
Storage
Temperature Range
-55 C to 105 C (1)
-10 C to 60 C (2)
Temperature Range
2
Signal Contact:50 V AC
Power Contact:200 V AC
Signal Contact:0.5 A
Power Contact:3.0A
Storage Humidity Range
Operating Humidity Range
Voltage
Rating
Relative humidity 85% max
(Not dewed)
Current
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
×
×
×
×
ELECTRIC CHARACTERISTICS
Contact Resistance
Insulation Resistance
Voltage Proof
100 mA(DC or 1000Hz)
Signal Contact : 70mΩ MAX.
Power Contact : 20mΩ MAX.
Signal Contact : 100 MΩMIN.
Power Contact : 1000 MΩMIN.
×
×
-
-
Signal Contact : 100 V DC.
Power Contact : 250 V DC
Signal Contact : 150 V AC for 1 min.
Power Contact : 600 V AC for 1 min.
×
×
×
-
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Insertion and
Withdrawal Forces
Mechanical Operation
Measured by applicable connector.
Insertion Force:
Withdrawal Force:
18 N MAX.
2 N MIN.
×
×
-
-
100 times insertions and extractions.
① Contact Resistance:
Signal Contact :
80mΩ MAX.
30mΩ MAX.
Power Contact :
② No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 55 to 10Hz, approx 5min
Single amplitude : 0.75 mm, 10 cycles
for 3 axial directions.
① No electrical discontinuity of 1 s.
② No damage, crack and looseness of parts.
×
×
-
-
490 m/s2 , duration of pulse 11 ms
at 3 times for 3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
(Steady state)
Exposed at 40±2 C, 90 ~ 95 %, 96 h.
① Contact Resistance:
×
×
-
-
Signal Contact :
Power Contact :
80mΩ MAX.
30mΩ MAX.
Rapid Change of
Temperature
Temperature
Time
-55
30
→
+85 C
30 min.
② Insulation Resistance:
Signal Contact :
→
100 M MIN.
1000 M MIN.
under
5
cycles.
(Relocation time to chamber : within 2~3 MIN)
Exposed at -55℃, 96 h
Power Contact :
③ No damage, crack and looseness of parts.
① Contact Resistance:
Cold
×
×
×
-
-
-
Signal Contact :
Power Contact :
80mΩ MAX.
30mΩ MAX.
Dry Heat
Sulfur Dioxide
Exposed at 105℃, 96 h
2
② No damage, crack and looseness of parts.
Exposed at 25±2℃, 75±5%RH, 25 PPM for 96 h.
(Test standard: IEC 68)
① No defect such as corrosion which impairs
the function of connector.
② Contact Resistance:
Signal Contact :
Power Contact :
80mΩ MAX.
30mΩ MAX.
Resistance to
Soldering Heat
1)Reflow soldering :
No deformation of case of excessive
looseness of the terminal.
×
×
-
-
Peak TMP : 260℃MAX
Reflow TMP: 220℃MIN for 60sec
2) Soldering irons : 360℃ MAX. for 5 sec.
Soldered at solder temperature
240±3℃ for immersion duration, 3 sec.
Solderability
A new uniform coating of solder shall cover a
minimum of 95 % of the surface being
immersed.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
TS.OONO
CHECKED
HT.YAMAGUCHI
HS.OKAWA
DATE
2
△
2
DIS-F-00002071
17.02.03
15.02.16
15.02.16
15.02.16
15.02.16
(1) Include temperature rise caused by current-carrying.
(2) “STORAGE” means a long-term storage state for the unused product
before assembly to PCB.
REMARKS
APPROVED
CHECKED
DESIGNED
DRAWN
KN.SHIBUYA
AH.EDASHIGE
AH.EDASHIGE
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-358065-00-00
FX23L-40S-0.5SV
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
2
△
1/1
CL573-2302-1-00
FORM HD0011-2-1