APPLICABLE STANDARD
Operating
Storage
Temperature Range
-55 C to 105 C (1)
-10 C to 60 C (2)
Temperature Range
Signal Contact:50 V AC
Power Contact:200 V AC
Signal Contact:0.5 A
Power Contact:3.0A
Storage Humidity Range
Operating Humidity Range
Voltage
Rating
Relative humidity 85% max
(Not dewed)
Current
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
×
×
×
×
Marking
ELECTRIC CHARACTERISTICS
Contact Resistance
Insulation Resistance
Voltage Proof
100 mA(DC or 1000Hz)
Signal Contact : 70mΩ MAX.
Power Contact : 20mΩ MAX.
Signal Contact : 100 MΩMIN.
Power Contact : 1000 MΩMIN.
×
×
-
-
Signal Contact : 100 V DC.
Power Contact : 250 V DC
Signal Contact : 150 V AC for 1 min.
Power Contact : 600 V AC for 1 min.
×
×
×
-
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Insertion and
Withdrawal Forces
Mechanical Operation
Measured by applicable connector.
Insertion Force:
Withdrawal Force:
27 N MAX.
3 N MIN.
×
×
-
-
100 times insertions and extractions.
① Contact Resistance:
Signal Contact :
80mΩ MAX.
30mΩ MAX.
Power Contact :
② No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 55 to 10Hz, approx 5min
Single amplitude : 0.75 mm, 10 cycles
for 3 axial directions.
① No electrical discontinuity of 1 s.
② No damage, crack and looseness of parts.
×
×
-
-
490 m/s2 , duration of pulse 11 ms
at 3 times for 3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
(Steady state)
Exposed at 40±2 C, 90 ~ 95 %, 96 h.
① Contact Resistance:
×
×
-
-
Signal Contact :
Power Contact :
80mΩ MAX.
30mΩ MAX.
Rapid Change of
Temperature
Temperature
Time
-55
30
→
+85 C
30 min.
② Insulation Resistance:
Signal Contact :
→
100 M MIN.
1000 M MIN.
under
5
cycles.
(Relocation time to chamber : within 2~3 MIN)
Exposed at -55℃, 96 h
Power Contact :
③ No damage, crack and looseness of parts.
① Contact Resistance:
Cold
×
×
×
-
-
-
Signal Contact :
Power Contact :
80mΩ MAX.
30mΩ MAX.
Dry Heat
Sulfur Dioxide
Exposed at 105℃, 96 h
② No damage, crack and looseness of parts.
Exposed at 25±2℃, 75±5%RH, 25 PPM for 96 h.
(Test standard: IEC 68)
① No defect such as corrosion which impairs
the function of connector.
② Contact Resistance:
Signal Contact :
Power Contact :
80mΩ MAX.
30mΩ MAX.
Resistance to
Soldering Heat
1)Reflow soldering :
No deformation of case of excessive
looseness of the terminal.
×
×
-
-
Peak TMP : 260℃MAX
Reflow TMP: 220℃MIN for 60sec
2) Soldering irons : 360℃ MAX. for 5 sec.
Soldered at solder temperature
240±3℃ for immersion duration, 3 sec.
Solderability
A new uniform coating of solder shall cover a
minimum of 95 % of the surface being
immersed.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(1) Include temperature rise caused by current-carrying.
(2) “STORAGE” means a long-term storage state for the unused product
before assembly to PCB.
REMARKS
APPROVED
CHECKED
DESIGNED
DRAWN
NH.NAKATA
MK.NAGATA
TS.OONO
18.04.12
18.04.12
18.04.12
18.04.12
Unless otherwise specified, refer to IEC 60512.
TS.OONO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
ELC-353553-20-00
FX23-60S-0.5SV(20)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CODE NO.
CL573-3203-5-20
FORM HD0011-2-1